OLED mod

Post Reply
Posts: 17
Joined: Sat Oct 16, 2010 11:10 am

Re: OLED mod

Post by cbrunschen » Wed Oct 11, 2017 9:38 pm

I've updated my 3D model a bit more:

The Bezel now just specifies extra space to add to the faceplate in each direction; the bevelling of the edge of the faceplate is now specified separately – so you can now bevel the edge of the faceplate without extending it, and vice versa.

I've also added support for adding a rotary encoder - both with 2 and with 3 buttons: the hole is 7mm in diameter, and an 11mm-sized rotary encoder without the KY-040 PCB - something like the ALPS EC11E15244G1) - will actually fit even with 3 buttons in place already.

Best wishes,

// Christian

Post Reply