Roland S-330 Utilitydisk not loading?

HxC Floppy Emulator Roland Samplers/Keyboards support
Post Reply
Groove
Posts: 1
Joined: Fri Jul 03, 2015 1:14 am

Roland S-330 Utilitydisk not loading?

Post by Groove » Fri Jul 03, 2015 1:22 am

Hi,

Today i have build in the HXC floppy Drive emulator into my Roland S330.

From JF i got the HXCSDFE.CFG file and the S330_Util1.hfe file wich i put on the formated FAT32 16 gig SD card.

After i started up the S-330 it's starting to load the utility disk. But when it's on 008/80 it stops and there is a message on the (left) screen of the S-330 itself saying: SEE CRT DISPLAY EXT CTRL = MOUSE. (I don't have a mouse or monitor)

What to do???

Thanks,

Olivier

Ohmen52
Posts: 17
Joined: Fri Aug 05, 2011 10:25 pm

Re: Roland S-330 Utilitydisk not loading?

Post by Ohmen52 » Sat Jul 04, 2015 2:35 pm

hi,

please look into the S-330's guide book, page 7 (http://www.sgroup.ca/archive/docs/S330_guide_book.pdf) and boot up your sampler according to your needs. There are three modes available while powering up. Hope this will be helpful. Best regards :)

Jeff
Site Admin
Posts: 6975
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Roland S-330 Utilitydisk not loading?

Post by Jeff » Tue Jul 14, 2015 7:03 am

Issue solved via email (problem not really related to the emulator.)

Post Reply