HxC Floppy Drive Emulator

Success!! Got an AKAI S01 sampler working with HcX emulator.

How exactly ? (Floppy dump ? Floppy image used ? Jumper settings / Floppy interface mode ? The floppy cable need to be reversed ?)


(and don't hesitate to post some pictures/videos )

My little "how to":
--------------------------------------------------------------------
AKAI S01 (OS Ver. 1.0) floppy disk data:

Double sided, 80 Tracks (0 - 79), 10 sectors, 500kbit/s, MFM
Total: 1600 sectors, 1638400 bytes
--------------------------------------------------------------------

1. Create an image from real floppy disk with Omni Flop 2.3b! => http://www.shlock.co.uk/Utils/OmniFlop/OmniFlop.htm
(Disk format: AKAI S-Series HD-Disk)

2. In HcXFloppyEmulator 1.6.9.0 load this image as RAW file with a.m. disk settings. RPM = 300, Sectors size = 1024, Auto GAP3 (standard)

-------------------------------------------------------------------------------------------
HFE file interface mode:
Auto (Generic Shugart)

Hardware Jumper settings:
Atari ST/Amiga/Shugart jumper settings: Drive A, ID0, no reversed floppy cable!
-------------------------------------------------------------------------------------------

Hope this will be helpful to other users.