Prophet 2002 + HXC working video

HxC Floppy Emulator Sequential Prophet Keyboards support
Post Reply
5c4r7
Posts: 55
Joined: Fri Feb 25, 2011 7:07 am

Prophet 2002 + HXC working video

Post by 5c4r7 » Fri Aug 31, 2012 9:20 pm

http://www.youtube.com/watch?v=OKYu-j7A ... ture=g-upl

It works! Another success!

On a side note gentlemen, I thought it would be worthy to mention that the mounting holes in the HXC bracket seem to be about 1/2 to 1cm off from most of my samplers so, the unit protrudes a bit. I can carefully drill new holes on my unit but I thought I should mention it just in case you wanted to modify or add it to future designs.

alkristo
Posts: 4
Joined: Tue Feb 16, 2016 11:34 am

Re: Prophet 2002 + HXC working video

Post by alkristo » Tue Feb 16, 2016 11:59 am

Hello, I've contact you with youtube, but this forum is more appropriate.

I've installed a Hxc in my p2002.
I've format an sd card in fat32 and copy some patch in .hfe format and also I copied the .cfg.
I do have the patch name on the screen.

But no transfer is happening when I put the p2002 on, I've also tried "Load one sound", no transfer...

Could you help me ?

Best regards

Cristo
Attachments
IMG_3594 a.jpg
IMG_3594 a.jpg (209.14 KiB) Viewed 1318 times
IMG_3592 a.jpg
IMG_3592 a.jpg (193.23 KiB) Viewed 1318 times
IMG_3590 a.jpg
IMG_3590 a.jpg (208.2 KiB) Viewed 1318 times

alkristo
Posts: 4
Joined: Tue Feb 16, 2016 11:34 am

Re: Prophet 2002 + HXC working video

Post by alkristo » Wed Feb 17, 2016 10:24 am

Issues fixed, it works !

Regards

Jeff
Site Admin
Posts: 4852
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Prophet 2002 + HXC working video

Post by Jeff » Wed Feb 17, 2016 5:02 pm

alkristo wrote:Issues fixed, it works !

Regards
Yes. Set the jumper to ID0-A and it works ;)

Post Reply