Hi folks,
I have installed the HxC in my A1200 including the display.
If you're interested in it and more pics have a look in my blog: http://metaneutrons.blogspot.com/2011/0 ... oject.html
Kind regards,
Fabian
Amiga 1200 with internal HxC
Re: Amiga 1200 with internal HxC
This looks sweet... i am going to replicate this installation on my Amiga 1200 Custom.
Can you post some details pictures on the button relocation? Where did you arrange that frame?
Also i am interested in the jumper settings on the internal floppy drive as you put it to DF1:
Berry
Can you post some details pictures on the button relocation? Where did you arrange that frame?
Also i am interested in the jumper settings on the internal floppy drive as you put it to DF1:
Berry
My blog:8-bit living… and dreaming away…
-
- Posts: 6
- Joined: Sun Aug 07, 2011 6:09 pm
Re: Amiga 1200 with internal HxC
Hi there,
the button relocation is done by using the internal J2 pin header of the emulator and a self soldered adapter. The pinout of J2 is in the manual of HxC. It's really easy. You find all pictures at https://picasaweb.google.com/1073598785 ... directlink
What frame are you talking about? The one for the display? This should be self-declaring if you take a look at the pictures. Otherwise just ask!
The internal floppy is not working at the moment. I've jumpered it using the internal jumpers from DS0 to DS1 but this doesn't seem to work. I have to check this out. I'm planing to add some kind of switch; so you can use the internal floppy as DF0 or DF1. But I have to work this out, first.
Kind regards,
Fabian
the button relocation is done by using the internal J2 pin header of the emulator and a self soldered adapter. The pinout of J2 is in the manual of HxC. It's really easy. You find all pictures at https://picasaweb.google.com/1073598785 ... directlink
What frame are you talking about? The one for the display? This should be self-declaring if you take a look at the pictures. Otherwise just ask!
The internal floppy is not working at the moment. I've jumpered it using the internal jumpers from DS0 to DS1 but this doesn't seem to work. I have to check this out. I'm planing to add some kind of switch; so you can use the internal floppy as DF0 or DF1. But I have to work this out, first.
Kind regards,
Fabian
Re: Amiga 1200 with internal HxC
Fabian,
I was aiming at the frame around to LCD to cover up your dremeling skills
I must admit that this is the best implementation on an Amiga that i have seen so far. The SDCard slot is really smooth!
So 1000 X for you for sharing your mod!
I was aiming at the frame around to LCD to cover up your dremeling skills
I must admit that this is the best implementation on an Amiga that i have seen so far. The SDCard slot is really smooth!
So 1000 X for you for sharing your mod!
My blog:8-bit living… and dreaming away…