The HxC Floppy Emulator working with a Morbidelli Author 510

Post here your pictures / videos / review of the HxC Floppy Emulator.
Post Reply
Jeff
Site Admin
Posts: 8091
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

The HxC Floppy Emulator working with a Morbidelli Author 510

Post by Jeff »

The HxC Floppy Emulator working with a Morbidelli Author 510 wood working machine

https://hxc2001.com/showroom/HxC_Floppy_ ... r_510.html

The Floppy disk drive of this Morbidelli Author 510 Wood working CNC machine was successfully replaced by an HxC Floppy Emulator.

- Original floppy disk drive was analyzed and backuped by the HxC Floppy Emulator software.

- DOS type images are managed with the HxC Floppy Emulator DOS Disk Browser.



Image

Image

Image

Image

dusnake
Posts: 1
Joined: Tue Jul 21, 2015 12:16 pm

Re: The HxC Floppy Emulator working with a Morbidelli Author

Post by dusnake »

Hello Jeff . Thanks for all the support you give to users.

I'm thinking of buying a HxC Rev F for Morbidelli Author 510, the floppy drive is not working properly . Buying this takes some kind of special physical configuration , as jumper or welds ??

You can guide me a little please ??
Thank you very much !!

Jeff
Site Admin
Posts: 8091
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: The HxC Floppy Emulator working with a Morbidelli Author

Post by Jeff »

Just replace the drive, copy some files to an sdcard, and you are ready ;)
The switch setting should be ID0-A.

Post Reply