Hi
My Pcb router Machine use Sieb & Meyer system
Its Filesystem is non dos standard and use Teac FD235HF 7529 Floppy with special Jumpers
Jumper
DS0 or DS1 (Two Floppies)
RY34
HA(HS-HI)
REN
FG
Jump Line
it connect PIN1 to HS
And Hxc can do sieb & meyer Bootdisk?
How Hxc compatibly with my Machine?
Re: How Hxc compatibly with my Machine?
Hi,jtschanlue wrote: And Hxc can do sieb & meyer Bootdisk?
Yes this should work without any problem.
If you have some difficulties to get the hxc floppy emulator working on the sieb & meyer machine don't hesistate to contact us !
About the disk, can you try to dump the disk with the hxc floppy emulator software and send me the HFE file ? :
https://hxc2001.com/floppy_drive_emulat ... r_soft.zip
https://hxc2001.com/floppy_drive_emulat ... Manual.pdf
https://hxc2001.com/contactus/
-
- Posts: 2
- Joined: Tue Mar 13, 2012 12:55 pm
Re: How Hxc compatibly with my Machine?
So finally it is successful.
Because I use HD disks.It should be froced to 2D for Dump
Because I use HD disks.It should be froced to 2D for Dump
Re: How Hxc compatibly with my Machine?
Nice !
I am interested by the HFE file. Can you send me it ? :
https://hxc2001.com/contactus/
Also can you post some details to know how did you proceed? (jumper setting...)
(and a small video of the CNC loading & doing something with the HxC would be very nice
Thanks by advance!
I am interested by the HFE file. Can you send me it ? :
https://hxc2001.com/contactus/
Also can you post some details to know how did you proceed? (jumper setting...)
(and a small video of the CNC loading & doing something with the HxC would be very nice
Thanks by advance!