How Hxc compatibly with my Machine?

[jtschanlue]

Hi
My Pcb router Machine use Sieb & Meyer system
Its Filesystem is non dos standard and use Teac FD235HF 7529 Floppy with special Jumpers

Jumper
DS0 or DS1 (Two Floppies)
RY34
HA(HS-HI)
REN
FG

Jumper

Teac-1.jpg (111.61 KiB) Viewed 4358 times

Jump Line
it connect PIN1 to HS

Jump Line

Teac-2.jpg (136.38 KiB) Viewed 4358 times

And Hxc can do sieb & meyer Bootdisk?

[Jeff]

And Hxc can do sieb & meyer Bootdisk?

Hi,

Yes this should work without any problem.

If you have some difficulties to get the hxc floppy emulator working on the sieb & meyer machine don't hesistate to contact us !

About the disk, can you try to dump the disk with the hxc floppy emulator software and send me the HFE file ? :
https://hxc2001.com/floppy_drive_emulat ... r_soft.zip
https://hxc2001.com/floppy_drive_emulat ... Manual.pdf

https://hxc2001.com/contactus/

[jtschanlue]

So finally it is successful.


Because I use HD disks.It should be froced to 2D for Dump

s0.jpg (49.25 KiB) Viewed 4334 times

s2.jpg (66.48 KiB) Viewed 4334 times

s4.jpg (71.61 KiB) Viewed 4334 times

[Jeff]

Nice !

I am interested by the HFE file. Can you send me it ? :
https://hxc2001.com/contactus/
Also can you post some details to know how did you proceed? (jumper setting...)

(and a small video of the CNC loading & doing something with the HxC would be very nice

Thanks by advance!