Mydata TP-9

Post Reply
martinr112
Posts: 3
Joined: Tue Feb 28, 2012 7:27 pm

Mydata TP-9

Post by martinr112 »

I have Mydata TP-9 pick and place machine.
It has two 5.25'' Teac FD-55BR floppy drives. Operating program on disc A and system settings on disc B
Operating system CP/M 2.2
HxC Floppy drive emulator works well for both disk only reading mode.

I need writing for system parameters for disc B
If writing I get error RBBS:121 and flashing other numbers after WBBS and RBBS.
HxC firmware: 1.6.1.1B
I attach HFE file for disc B
Attachments
SYS3_masin1.rar
(106.66 KiB) Downloaded 687 times

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Mydata TP-9

Post by Jeff »

martinr112 wrote:I have Mydata TP-9 pick and place machine.
It has two 5.25'' Teac FD-55BR floppy drives. Operating program on disc A and system settings on disc B
Operating system CP/M 2.2
HxC Floppy drive emulator works well for both disk only reading mode.

I need writing for system parameters for disc B
If writing I get error RBBS:121 and flashing other numbers after WBBS and RBBS.
HxC firmware: 1.6.1.1B
I attach HFE file for disc B
Can you send me the drive A image ?
This is always 121 after RBBS ? Can you send me a small video to show me how react the floppy emulator ?

https://hxc2001.com/contactus/

martinr112
Posts: 3
Joined: Tue Feb 28, 2012 7:27 pm

Re: Mydata TP-9

Post by martinr112 »

I emailed video and images.
I have 4-channel digital scope if you need signal patterns.

martinr112
Posts: 3
Joined: Tue Feb 28, 2012 7:27 pm

Re: Mydata TP-9

Post by martinr112 »

Firmware update solved the problem.
Thank you Jeff for fast support.

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Mydata TP-9

Post by Jeff »



:wink:

Post Reply