Hallo. I need some special floppy emulator for embroidery machine. Old type of floppy drive is 3,5" TEAC FD-235F, 720KB, 2DD, PC compatible (link: http://www.teac.com/data_storage/floppy ... py_drives/). SD Floppy Emulator fit to me. Following format is used: IBM system 34 format.
Could you upgrade software and firmware leave only parameters for this data type. If you need some more information ask me. With best regards, Serhii.
Special floppy emulator
Re: Special floppy emulator
This should already works without problem with the HxC Floppy Emulator.tdziGer wrote:Hallo. I need some special floppy emulator for embroidery machine. Old type of floppy drive is 3,5" TEAC FD-235F, 720KB, 2DD, PC compatible (link: http://www.teac.com/data_storage/floppy ... py_drives/). SD Floppy Emulator fit to me. Following format is used: IBM system 34 format.
Could you upgrade software and firmware leave only parameters for this data type. If you need some more information ask me. With best regards, Serhii.
Why do you want to modify the firmware ?
Re: Special floppy emulator
1. It will be easier for people who work on the equipment
2. Cheaper for production? (cheaper processor).
P.S. more information in the letter redirected from Lotharek.
2. Cheaper for production? (cheaper processor).
P.S. more information in the letter redirected from Lotharek.
Re: Special floppy emulator
This is not a firmware problem but a software problem.tdziGer wrote: 1. It will be easier for people who work on the equipment
You can easily make some batch script to easily convert/copy floppy images.
cheaper processor?tdziGer wrote: 2. Cheaper for production? (cheaper processor).
Unfortunately you will gain almost nothing for lot of works... Max gain expected : 0.88$
Re: Special floppy emulator
Thanks for reply, Jeff. May be after the test device, I receive more concrete suggestions. Thank you for your attention. Best wishes.