Support for Netstal synergy - injection molding.
Support for Netstal synergy - injection molding.
Hello,
Please can replace the floppy drive on the machines of Netstal your HXC Floppy emulator.
These are machines.
Netstal Synergy.
The photo should be here:http://www.used-injection-moulding-mach ... 01609.html
Thank you for your help and advice.
Jack
Please can replace the floppy drive on the machines of Netstal your HXC Floppy emulator.
These are machines.
Netstal Synergy.
The photo should be here:http://www.used-injection-moulding-mach ... 01609.html
Thank you for your help and advice.
Jack
Re: Support for Netstal synergy - injection molding.
Yes probably.
the disks of this machines are readable on a pc ?
the disks of this machines are readable on a pc ?
Re: Support for Netstal synergy - injection molding.
Thank you for a quick response.Jeff wrote:Yes probably.
the disks of this machines are readable on a pc ?
Floppy disks are not readable on PCs.
Is there any possibility that it could be to add functions to read these disks?
Can I do something for it?
Jack
Re: Support for Netstal synergy - injection molding.
Hello,
I'd like to see if the HXC floppy emulator work on the said machine before buying it.
I have a diskette from this machine, is there any way of knowing whether it will work as HXC structure floppy?
Sorry for English (Google)
Jack
I'd like to see if the HXC floppy emulator work on the said machine before buying it.
I have a diskette from this machine, is there any way of knowing whether it will work as HXC structure floppy?
Sorry for English (Google)
Jack
Re: Support for Netstal synergy - injection molding.
Try to make an image with the hxc software.
follow the procedure page 14:
https://hxc2001.com/download/floppy_driv ... al_ENG.pdf
follow the procedure page 14:
https://hxc2001.com/download/floppy_driv ... al_ENG.pdf
Re: Support for Netstal synergy - injection molding.
Thanks for the advice, I'll look into it.Jeff wrote:Try to make an image with the hxc software.
follow the procedure page 14:
https://hxc2001.com/download/floppy_driv ... al_ENG.pdf
Jack
Re: Support for Netstal synergy - injection molding.
I did a test.
Jack
Jack
- Attachments
-
- hxc_netstal.png (62.25 KiB) Viewed 9320 times
Re: Support for Netstal synergy - injection molding.
Can you send me one of these disks ?
Re: Support for Netstal synergy - injection molding.
Hello,Jeff wrote:Can you send me one of these disks ?
However, I can send mail (I'm from Czech Republic), or I can somehow save the contents to any image and send email.
If you want to drive by post, so please send me a private message address.
You can contact me at the email
Jack
Re: Support for Netstal synergy - injection molding.
If you send me the address, I will send you a diskette.
Jack
Jack
Re: Support for Netstal synergy - injection molding.
Here is the disk geometry :joys_333 wrote:If you send me the address, I will send you a diskette.
Jack
not a problem for the hxc emulator.
Re: Support for Netstal synergy - injection molding.
Thank you,Jeff wrote:Here is the disk geometry :joys_333 wrote:If you send me the address, I will send you a diskette.
Jack
not a problem for the hxc emulator.
I would like to ask, how to create a disk image that I have is that I could use on the machine Netstal.
Floppy disks are not readable on PCs.
Jack