Support for Netstal synergy - injection molding.

Post Reply
joys_333
Posts: 8
Joined: Wed Jul 20, 2016 7:30 am

Support for Netstal synergy - injection molding.

Post by joys_333 » Wed Jul 20, 2016 7:44 am

Hello,
Please can replace the floppy drive on the machines of Netstal your HXC Floppy emulator.
These are machines.
Netstal Synergy.
The photo should be here:http://www.used-injection-moulding-mach ... 01609.html

Thank you for your help and advice.
Jack

Jeff
Site Admin
Posts: 5625
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Support for Netstal synergy - injection molding.

Post by Jeff » Wed Jul 20, 2016 8:06 am

Yes probably.

the disks of this machines are readable on a pc ?

joys_333
Posts: 8
Joined: Wed Jul 20, 2016 7:30 am

Re: Support for Netstal synergy - injection molding.

Post by joys_333 » Wed Jul 20, 2016 10:12 am

Jeff wrote:Yes probably.

the disks of this machines are readable on a pc ?
Thank you for a quick response.
Floppy disks are not readable on PCs.
Is there any possibility that it could be to add functions to read these disks?
Can I do something for it?

Jack

joys_333
Posts: 8
Joined: Wed Jul 20, 2016 7:30 am

Re: Support for Netstal synergy - injection molding.

Post by joys_333 » Fri Jul 22, 2016 9:21 am

Hello,

I'd like to see if the HXC floppy emulator work on the said machine before buying it.
I have a diskette from this machine, is there any way of knowing whether it will work as HXC structure floppy?
Sorry for English (Google)

Jack

Jeff
Site Admin
Posts: 5625
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Support for Netstal synergy - injection molding.

Post by Jeff » Fri Jul 22, 2016 1:07 pm

Try to make an image with the hxc software.
follow the procedure page 14:
http://hxc2001.com/download/floppy_driv ... al_ENG.pdf

joys_333
Posts: 8
Joined: Wed Jul 20, 2016 7:30 am

Re: Support for Netstal synergy - injection molding.

Post by joys_333 » Mon Jul 25, 2016 8:05 am

Jeff wrote:Try to make an image with the hxc software.
follow the procedure page 14:
http://hxc2001.com/download/floppy_driv ... al_ENG.pdf
Thanks for the advice, I'll look into it.
Jack

joys_333
Posts: 8
Joined: Wed Jul 20, 2016 7:30 am

Re: Support for Netstal synergy - injection molding.

Post by joys_333 » Fri Jul 29, 2016 4:58 pm

I did a test.

Jack
Attachments
hxc_netstal.png
hxc_netstal.png (62.25 KiB) Viewed 2588 times

Jeff
Site Admin
Posts: 5625
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Support for Netstal synergy - injection molding.

Post by Jeff » Thu Aug 04, 2016 12:44 am

Can you send me one of these disks ?

joys_333
Posts: 8
Joined: Wed Jul 20, 2016 7:30 am

Re: Support for Netstal synergy - injection molding.

Post by joys_333 » Fri Aug 05, 2016 1:44 pm

Jeff wrote:Can you send me one of these disks ?
Hello,
However, I can send mail (I'm from Czech Republic), or I can somehow save the contents to any image and send email.
If you want to drive by post, so please send me a private message address.
You can contact me at the email

Jack

joys_333
Posts: 8
Joined: Wed Jul 20, 2016 7:30 am

Re: Support for Netstal synergy - injection molding.

Post by joys_333 » Wed Aug 10, 2016 9:55 pm

If you send me the address, I will send you a diskette.
Jack

Jeff
Site Admin
Posts: 5625
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Support for Netstal synergy - injection molding.

Post by Jeff » Wed Aug 24, 2016 8:08 am

joys_333 wrote:If you send me the address, I will send you a diskette.
Jack
Here is the disk geometry :
netstal.jpg
netstal.jpg (288.74 KiB) Viewed 2495 times
not a problem for the hxc emulator.

joys_333
Posts: 8
Joined: Wed Jul 20, 2016 7:30 am

Re: Support for Netstal synergy - injection molding.

Post by joys_333 » Wed Aug 24, 2016 11:18 am

Jeff wrote:
joys_333 wrote:If you send me the address, I will send you a diskette.
Jack
Here is the disk geometry :
netstal.jpg
not a problem for the hxc emulator.
Thank you,
I would like to ask, how to create a disk image that I have is that I could use on the machine Netstal.
Floppy disks are not readable on PCs.
Jack

Post Reply