CNC Pluritec Mega 4500 Upgrade To HxC Floppy Emulator SD.

Post Reply
3at138
Posts: 4
Joined: Tue Feb 11, 2014 10:37 pm

CNC Pluritec Mega 4500 Upgrade To HxC Floppy Emulator SD.

Post by 3at138 » Tue Feb 11, 2014 10:57 pm

Dear Friends from the forum:

Please I need information about installing the Floppy Emulator on the CNC Pluritec Mega 4500 and some images for the SD card.

Please If anyone can help me, I am very happy.


Thanks

Best Regards

Celso Marques (Brazil).

Jeff
Site Admin
Posts: 5706
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: CNC Pluritec Mega 4500 Upgrade To HxC Floppy Emulator SD

Post by Jeff » Tue Feb 11, 2014 11:19 pm

As always : please give me some pictures of the old drive with its jumper and tell me if you can read the disks of this machine with a computer.

3at138
Posts: 4
Joined: Tue Feb 11, 2014 10:37 pm

Re: CNC Pluritec Mega 4500 Upgrade To HxC Floppy Emulator SD

Post by 3at138 » Wed Feb 12, 2014 1:53 am

Hi Jeff,good day!!

Ok I will take the picture and jumpers.

I try get more information.

Thanks for answer for now.

Best Regards. Celso Marques

3at138
Posts: 4
Joined: Tue Feb 11, 2014 10:37 pm

Re: CNC Pluritec Mega 4500 Upgrade To HxC Floppy Emulator SD

Post by 3at138 » Wed Feb 12, 2014 10:52 pm

Hi Jeff,good day.
Today I try get the disket for reader on the PC,but the disket do not open the files. Are protected.
But when start up the machine, on screen I see this extension.

B:18-30-AXIS-200T.sy2

On monday I try take the pictures from the machine drives
A and B .

Best Regards.

Celso Marques.

3at138
Posts: 4
Joined: Tue Feb 11, 2014 10:37 pm

Re: CNC Pluritec Mega 4500 Upgrade To HxC Floppy Emulator SD

Post by 3at138 » Fri Feb 14, 2014 11:41 pm

Hi Jeff. good night.

Please check your e-mail the real machine is Sieb And Meyer CNC 45.00 I need help.

Thanks Advanced.

Best Regards

Celso Marques

Post Reply