sieb and Meyer CNC45 controller.

Post Reply
ian.evans
Posts: 2
Joined: Thu Oct 24, 2013 11:14 pm

sieb and Meyer CNC45 controller.

Post by ian.evans »

Hi
we have Sieb and Meyer CNC45 controllers on our CNC machines.
Is there specific configuration file for the disk images for this set-up?
I ask as you have video of a sieb and meyer controller booting from your floppy emulator, but I have not been able yet to get my emulator working with them. I suspect I am missing something important somewhere :)
many thanks in anticipation

Ian

ian evans
maintenance support engineer

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: sieb and Meyer CNC45 controller.

Post by Jeff »

Do you have the boot disk image?

ian.evans
Posts: 2
Joined: Thu Oct 24, 2013 11:14 pm

Re: sieb and Meyer CNC45 controller.

Post by ian.evans »

Hi. after much fooling around with iffy disks and drives, i have a good disk image. how do i get it to you?

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: sieb and Meyer CNC45 controller.

Post by Jeff »

ian.evans wrote:Hi. after much fooling around with iffy disks and drives, i have a good disk image. how do i get it to you?
https://hxc2001.com/contactus/

Post Reply