HxC on a chemistry analyser

LCServ
Posts: 3
Joined: Fri Jun 28, 2013 7:46 am
Location: Germany
Contact:

Re: HxC on a chemistry analyser

Post by LCServ » Thu Aug 08, 2013 11:22 am

Hello all,

Our company (together with Jeff) have found the solution to work with the Emulator on Hitachi Analyzers. Please feel free to contact me: Service@Labcon.de

Best Regards

Dennis
HXC Floppy Emulator on Hitachi Analyzers Hitachi 911 Hitachi 912 Hitachi 917 Hitachi 902 Elecsys 2010 Dont hesitate to contact me! service[at]labcon.de

truongminhvl
Posts: 4
Joined: Sun Jun 16, 2013 5:03 pm

Re: HxC on a chemistry analyser

Post by truongminhvl » Tue Aug 20, 2013 4:38 am

Hi Jeff

I just buy a HxC REV.F to use for Hitachi 717 Chemistry analyzer. I'm using a SD card Buffalo 4G. After i formated SD card to FAT32, I created a Floppy disk image (3''5 1.44MB DSHD FAT12 and 5''25 1.2MB DSHD FAT12) from HxCFloppyEmulator software. I copy them to SD card. I plug HxC REV.F to analyzer, set jumper ID1A to ON and format it. It formated Okey. After that i copy file from Drive 1 to Emulator but it error. Instrument display "FD write" error. I don't know what problem and how to resolve it ? I sent to you file Hfe which instrument formated okey.
Attachments
HFE file formated okey.rar
(51.86 KiB) Downloaded 418 times

Jeff
Site Admin
Posts: 6695
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: HxC on a chemistry analyser

Post by Jeff » Tue Nov 19, 2013 12:54 am

Image

Image

Image

Image

Image

Image

:D
Contact Labcon for more details ! : Service@Labcon.de

truongminhvl
Posts: 4
Joined: Sun Jun 16, 2013 5:03 pm

Re: HxC on a chemistry analyser

Post by truongminhvl » Sat Dec 07, 2013 6:15 pm

Hi Jeff,

I have a problem with HxC Emulator Rev.F on Elecsys 2010 analyzer. Before that instrument was using a CF-FD Emulator but I want to replace it by HxC Emulator. I converted files .img on CF Card to .hfe files. Make a config file with interface mode IMB PC 1.44MB. Set jumper ID0A to ON. But instrument can not start up. I don’t know where is wrong? Pls give me some advise.
It using firmware version 1.2.8.40. I send you files .img which using on CF card for refer.
Attachments
disk0.zip
(99.39 KiB) Downloaded 393 times

LCServ
Posts: 3
Joined: Fri Jun 28, 2013 7:46 am
Location: Germany
Contact:

Re: HxC on a chemistry analyser

Post by LCServ » Wed Feb 11, 2015 2:00 pm

truongminhvl wrote:Hi Jeff,

I have a problem with HxC Emulator Rev.F on Elecsys 2010 analyzer. Before that instrument was using a CF-FD Emulator but I want to replace it by HxC Emulator. I converted files .img on CF Card to .hfe files. Make a config file with interface mode IMB PC 1.44MB. Set jumper ID0A to ON. But instrument can not start up. I don’t know where is wrong? Pls give me some advise.
It using firmware version 1.2.8.40. I send you files .img which using on CF card for refer.
Please Contact me at service@labcon.de !
HXC Floppy Emulator on Hitachi Analyzers Hitachi 911 Hitachi 912 Hitachi 917 Hitachi 902 Elecsys 2010 Dont hesitate to contact me! service[at]labcon.de

LCServ
Posts: 3
Joined: Fri Jun 28, 2013 7:46 am
Location: Germany
Contact:

Re: HxC on a chemistry analyser

Post by LCServ » Wed Feb 11, 2015 2:04 pm

HXC Floppy Emulator in Hitachi 912!

Image

Image

Image
Attachments
DSCN8762 (Klein).jpg
DSCN8762 (Klein).jpg (77.44 KiB) Viewed 3695 times
DSCN8758 (Klein).jpg
DSCN8758 (Klein).jpg (75.71 KiB) Viewed 3695 times
DSCN8755zug (Klein).jpg
DSCN8755zug (Klein).jpg (77.31 KiB) Viewed 3695 times
HXC Floppy Emulator on Hitachi Analyzers Hitachi 911 Hitachi 912 Hitachi 917 Hitachi 902 Elecsys 2010 Dont hesitate to contact me! service[at]labcon.de

Post Reply