I have Mydata TP-9 pick and place machine.
It has two 5.25'' Teac FD-55BR floppy drives. Operating program on disc A and system settings on disc B
Operating system CP/M 2.2
HxC Floppy drive emulator works well for both disk only reading mode.
I need writing for system parameters for disc B
If writing I get error RBBS:121 and flashing other numbers after WBBS and RBBS.
HxC firmware: 1.6.1.1B
I attach HFE file for disc B
Mydata TP-9
-
- Posts: 3
- Joined: Tue Feb 28, 2012 7:27 pm
Mydata TP-9
- Attachments
-
- SYS3_masin1.rar
- (106.66 KiB) Downloaded 722 times
Re: Mydata TP-9
Can you send me the drive A image ?martinr112 wrote:I have Mydata TP-9 pick and place machine.
It has two 5.25'' Teac FD-55BR floppy drives. Operating program on disc A and system settings on disc B
Operating system CP/M 2.2
HxC Floppy drive emulator works well for both disk only reading mode.
I need writing for system parameters for disc B
If writing I get error RBBS:121 and flashing other numbers after WBBS and RBBS.
HxC firmware: 1.6.1.1B
I attach HFE file for disc B
This is always 121 after RBBS ? Can you send me a small video to show me how react the floppy emulator ?
https://hxc2001.com/contactus/
-
- Posts: 3
- Joined: Tue Feb 28, 2012 7:27 pm
Re: Mydata TP-9
I emailed video and images.
I have 4-channel digital scope if you need signal patterns.
I have 4-channel digital scope if you need signal patterns.
-
- Posts: 3
- Joined: Tue Feb 28, 2012 7:27 pm
Re: Mydata TP-9
Firmware update solved the problem.
Thank you Jeff for fast support.
Thank you Jeff for fast support.