Hi Jeff,
please, help I stuck with DSS-1.
I have successfully converted all *.dss library since it was automatically recognized by HxC software, but can't convert my Omniflop library in *.IMG format.
I did following:
1. downloaded custom layout file posted here: empty_korgdss1.fpf
2. in the Load RAW Image menu selected "Custom Layout", loaded fpf file and then Loaded RAW file (*.IMG)
3. plug into DSS-1 and it reports it as unformatted.
Please, help. I attached IMG file and FPF file I used.
Converting DSS-1 Omniflop images to HFE
Converting DSS-1 Omniflop images to HFE
- Attachments
-
- la.part2.rar
- (220 KiB) Downloaded 659 times
-
- la.part1.rar
- (220 KiB) Downloaded 678 times
-
- empty_korgdss1.zip
- (172 Bytes) Downloaded 603 times
Re: Converting DSS-1 Omniflop images to HFE
3rd attachment is here
- Attachments
-
- la.part3.rar
- (94.96 KiB) Downloaded 635 times
Re: Converting DSS-1 Omniflop images to HFE
General rule : Please avoid omniflop -> It just output raw/dsk file and doesn't give any detail about the disk geometry... Use the HxC dump tool instead or ImageDisk which use a better file image format (*.IMD).
the fdp file seems to be corrupted.
Anyway i will add the one xml description into the layout format list for the korg.
the fdp file seems to be corrupted.
Anyway i will add the one xml description into the layout format list for the korg.
Re: Converting DSS-1 Omniflop images to HFE
Thank you Jeff, noted.
Can you let me know manual settings so I should not wait until XML info is added into the tool?
Can you let me know manual settings so I should not wait until XML info is added into the tool?
Re: Converting DSS-1 Omniflop images to HFE
Awesome, thank you!