My SD CARD Prototype work smooth with PC But WETO on PC98

HxC Floppy Emulator on PC88 / PC98 and compatible support
Post Reply
sixty_cel
Posts: 60
Joined: Sun Nov 22, 2009 3:29 pm
Location: Thailand

My SD CARD Prototype work smooth with PC But WETO on PC98

Post by sixty_cel »

Hi Jeff

Please see the detail of image file of PC98 .

http://www.retropc.net/yui/np2.html

Here at [binary(426kb)] please download and tell me the detail of

image file of it.

Jeff do you know I made the prototype version 20 set but now it's

cannot work.

I can buy your officer version If it can work.

The model that I ever show you is the one of many model.

Now I want only image file first .

If you can tell me the image file I just order you 2 set first.

Next step leave me work on my lab.

Hope you can help me.

Ps. The Emulator is Neko project II for PC.

Thank you for reading.

Sixty_cel

Image

Image

sixty_cel
Posts: 60
Joined: Sun Nov 22, 2009 3:29 pm
Location: Thailand

Post by sixty_cel »


Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Post by Jeff »

I don't understand what do you want. A new file image support ?

sixty_cel
Posts: 60
Joined: Sun Nov 22, 2009 3:29 pm
Location: Thailand

Post by sixty_cel »

Hi Jeff

Thank you for your reply.

I want to know how to set property of image file.

sixty_cel
Posts: 60
Joined: Sun Nov 22, 2009 3:29 pm
Location: Thailand

Post by sixty_cel »

Yes I want to know the property of it and then I shall set config of it.

Because I'm cannot to know or analysis the floppy disk spec.

But the system of pc 98 is dos japanese and can accept the english dos

format at 720k only.

I ever set config

at -track type MFM , 80 track ,9sec/track,sector ID start 1 ,300rpm

512 sector, 250kbit/sec ,Gap 3 50, Inter leave 1,total sector 1440

totalsize 737280,

It can start around 3second to start format but cannot format in finally.

the format of them have 3 type

640k 8sector,2640k 9sector ,1 M 8sector

Thank you for reading

Post Reply