ZX Spectrum +3 conection

HxC Floppy Emulator on ZX Spectrum and compatible support
Post Reply
kikems
Posts: 1
Joined: Sat Jun 23, 2007 9:36 am

ZX Spectrum +3 conection

Post by kikems » Fri Jul 16, 2010 2:20 pm

What´s the correct jumper config and cable conections to conect SDCard emulator as external drive B on spectrum +3 ?

I´m conected like an amtrad cpc jumper config for drive B and the cable with conected jumped pins 24 and 23 , but not works.

Jeff
Site Admin
Posts: 4910
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: ZX Spectrum +3 conection

Post by Jeff » Fri Jul 16, 2010 9:23 pm

kikems wrote:What´s the correct jumper config and cable conections to conect SDCard emulator as external drive B on spectrum +3 ?

I´m conected like an amtrad cpc jumper config for drive B and the cable with conected jumped pins 24 and 23 , but not works.
If you want use the external disk drive connector, try to put the jumper in the id1 position, without the jumper on pins23/24.
Perhaps the Floppy cable should be reverted on the hxc floppy emulator.

Post Reply