SD Slim

HxC Floppy Emulator on ZX Spectrum and compatible support
Post Reply
brylant
Posts: 2
Joined: Mon Feb 27, 2017 9:05 pm

SD Slim

Post by brylant » Mon Feb 27, 2017 9:14 pm

Hello,

I have a problem with my SD Slim (SDHxCFESlim RevA) and Spectrum +3.

Slim is connected to Spectrum with non twisted ribbon, all jumpers in down position, only 6 up (ID1B). I want to get SD Slim as my B: drive.

Ribbon's red mark is at far left side looking at the back of the Sinclair and next to power connector at the SD Slim.

I'm typing cat "b:" and nothing happens. Original 3" drive works like a charm.

I have attached my configuration and sample disk image.

Thanks for help.
Attachments
sdslim.zip
(95.05 KiB) Downloaded 34 times

Jeff
Site Admin
Posts: 4653
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: SD Slim

Post by Jeff » Thu Mar 02, 2017 3:53 pm

Should be set to ID1A.

brylant
Posts: 2
Joined: Mon Feb 27, 2017 9:05 pm

Re: SD Slim

Post by brylant » Thu Mar 02, 2017 7:06 pm

Thank you Jeff!

Post Reply