hfe to dsk

[mau_rizio]

Is it possible to convert back hfe files to dsk (msx or pc)?

[Jeff]

Is it possible to convert back hfe files to dsk (msx or pc)?

Yes in same manner you convert dsk to hfe .

[mau_rizio]

Is it possible to convert back hfe files to dsk (msx or pc)?

Yes in same manner you convert dsk to hfe .

Yes but when i click on export there are hfe, vtr, mfm, afi, img, cpc dsk and imd.

i've tried with cpc dsk, but it did not work on a dsk manager for windows.

Perhapse i'm doing it in the wrong way, please explain

thak you.

[Jeff]

Is it possible to convert back hfe files to dsk (msx or pc)?

Yes in same manner you convert dsk to hfe .

Yes but when i click on export there are hfe, vtr, mfm, afi, img, cpc dsk and imd.

i've tried with cpc dsk, but it did not work on a dsk manager for windows.

Perhapse i'm doing it in the wrong way, please explain

thak you.

What doesn't work?

[mau_rizio]

Yes in same manner you convert dsk to hfe .

Yes but when i click on export there are hfe, vtr, mfm, afi, img, cpc dsk and imd.

i've tried with cpc dsk, but it did not work on a dsk manager for windows.

Perhapse i'm doing it in the wrong way, please explain

thak you.

What doesn't work?

I cannot open the dsk image exported using the cpc dsk format.
Wich format i have to use? Same question for the ms-dos disks.

[Jeff]

Yes but when i click on export there are hfe, vtr, mfm, afi, img, cpc dsk and imd.

i've tried with cpc dsk, but it did not work on a dsk manager for windows.

Perhapse i'm doing it in the wrong way, please explain

thak you.

What doesn't work?

I cannot open the dsk image exported using the cpc dsk format.
Wich format i have to use? Same question for the ms-dos disks.

more details please :
<<I cannot open the dsk...>>
open with what ?

[mau_rizio]

What doesn't work?

I cannot open the dsk image exported using the cpc dsk format.
Wich format i have to use? Same question for the ms-dos disks.

more details please :
<<I cannot open the dsk...>>
open with what ?

I'm using two programs for windows:
Disk Manager - http://www.lexlechz.at/en/software.html
Disk Explorer - http://hp.vector.co.jp/authors/VA013937 ... dex_e.html

But tell me wich file type i've to use when i click on Export.

[Jeff]

more details please :
<<I cannot open the dsk...>>
open with what ?

I'm using two programs for windows:
Disk Manager - http://www.lexlechz.at/en/software.html
Disk Explorer - http://hp.vector.co.jp/authors/VA013937 ... dex_e.html

But tell me wich file type i've to use when i click on Export.

Ok so we are not talking about CPC disk tools

just export as "IMG file (RAW Sector file format)"

[mau_rizio]

more details please :
<<I cannot open the dsk...>>
open with what ?

I'm using two programs for windows:
Disk Manager - http://www.lexlechz.at/en/software.html
Disk Explorer - http://hp.vector.co.jp/authors/VA013937 ... dex_e.html

But tell me wich file type i've to use when i click on Export.

Ok so we are not talking about CPC disk tools

Exactly, we were talking about msx dsk, i was using cpc dsk beacuse it's the only dsk type available for export.

just export as "IMG file (RAW Sector file format)"

Yes this works

This is the same for ms-dos images and amiga images?

[Jeff]

just export as "IMG file (RAW Sector file format)"

Yes this works

This is the same for ms-dos images and amiga images?

Yes exactly. For amiga just rename the .IMG into .ADF after conversion.

[mau_rizio]

just export as "IMG file (RAW Sector file format)"

Yes this works

This is the same for ms-dos images and amiga images?

Yes exactly. For amiga just rename the .IMG into .ADF after conversion.

Ok, thank you.

[Pedro48]

Hi folks,

I have a similar query. Using the floppy emulator for a TRS-80 model 4, so far so good , convert all DSK (JV1,JV3) images to .HFE no problem , can read and write from the emulator. When I try and convert the .HFE back to a DSK( JV1,JV3), can't seem to make this work. Have tried each of the file formats, none work, and even save as .IMG and rename .. still no work.

Using Matthew Reed TRS32 software to read images, works fine with the original, will not open the converted .HFE

Any help much appreciated ..

Peter

[Jeff]

Hi folks,

I have a similar query. Using the floppy emulator for a TRS-80 model 4, so far so good , convert all DSK (JV1,JV3) images to .HFE no problem , can read and write from the emulator. When I try and convert the .HFE back to a DSK( JV1,JV3), can't seem to make this work. Have tried each of the file formats, none work, and even save as .IMG and rename .. still no work.

Using Matthew Reed TRS32 software to read images, works fine with the original, will not open the converted .HFE

Any help much appreciated ..

Peter

Hi,

JV1/JV3/DMK export is planned. Stay tuned !

[Pedro48]

H Jeff,

Has there been any update for the JV1/JV3/DMK export ....

thanks...

[gonk23]

Update: JV3 and DMK export is now available with v2.0.15.0 of the software.