I checked many files.
Dumped rom by my Griffin(firmware version V1) has not AA BB 02 in the header.
But, there are 2byte different. Byte 0Eh & 0Fh is 56 31 "V1" in ascii.
My griffin is early firmware. If I use later firmware, AA BB 02 header may be add.
But No problem I can change using binary editor.
Ok , I confirm drag&drop working AA BB 02 file. Thanks.
Please support GameDcotor series.
SMC file support over 24Mbit Rom
okkazmat wrote:I checked many files.
Dumped rom by my Griffin(firmware version V1) has not AA BB 02 in the header.
But, there are 2byte different. Byte 0Eh & 0Fh is 56 31 "V1" in ascii.
My griffin is early firmware. If I use later firmware, AA BB 02 header may be add.
But No problem I can change using binary editor.
Ok , I confirm drag&drop working AA BB 02 file. Thanks.
Please support GameDcotor series.
If you use the latest firmware it's probably a bad decoupling and/or a bad 3V3 regulation and/or a bad pcb routing (no ground plane) problem.kazmat wrote:Hi Jeff
I am waiting GameDoctor support now.
Btw, I found my SD-card PCB can't write, delete file & format disk.
LCD freeze track 0.
Any advice about that ?
ok I will check them later.
I have another question about FDD pinout of SDCard version.
This pinout is based on Amiga FDD pinout, I think.
In PC/AT pin34 is disk change signal but Ready signal in SDCard ver.
pin2 is density select signal but disk change signal in SDCard ver.
Should I need to change signal when I use as PC FDD ?
I have another question about FDD pinout of SDCard version.
This pinout is based on Amiga FDD pinout, I think.
In PC/AT pin34 is disk change signal but Ready signal in SDCard ver.
pin2 is density select signal but disk change signal in SDCard ver.
Should I need to change signal when I use as PC FDD ?
no it's done by the software.kazmat wrote:ok I will check them later.
I have another question about FDD pinout of SDCard version.
This pinout is based on Amiga FDD pinout, I think.
In PC/AT pin34 is disk change signal but Ready signal in SDCard ver.
pin2 is density select signal but disk change signal in SDCard ver.
Should I need to change signal when I use as PC FDD ?