I'm having difficulty switching disks. The LCD buttons are just cycling between the disk in A (as chosen via autoboot) and autoboot.hxe. It's not allowing me to traverse the SD. Is the use of the autoboot.hxe mutually exclusive with use of the LCD/buttons?
When traversing w/ the buttons I would expect it to just walk the filesystem on the SD.
LCDs button usage
Re: LCDs button usage
just use a normal cfg file (without autoboot mode).telengard wrote:I'm having difficulty switching disks. The LCD buttons are just cycling between the disk in A (as chosen via autoboot) and autoboot.hxe. It's not allowing me to traverse the SD. Is the use of the autoboot.hxe mutually exclusive with use of the LCD/buttons?
When traversing w/ the buttons I would expect it to just walk the filesystem on the SD.
Re: LCDs button usage
So once using autoboot, you cannot use the buttons? I somehow managed to get it to do what I wanted by holding down the enter key for a bit and hitting left to right.Jeff wrote:just use a normal cfg file (without autoboot mode).telengard wrote:I'm having difficulty switching disks. The LCD buttons are just cycling between the disk in A (as chosen via autoboot) and autoboot.hxe. It's not allowing me to traverse the SD. Is the use of the autoboot.hxe mutually exclusive with use of the LCD/buttons?
When traversing w/ the buttons I would expect it to just walk the filesystem on the SD.
I'll do that though if that is the easiest method, thanks.
Re: LCDs button usage
To leave the autoboot mode, just press the middle/select button some seconds. then you can browse the sdcard.telengard wrote:So once using autoboot, you cannot use the buttons? I somehow managed to get it to do what I wanted by holding down the enter key for a bit and hitting left to right.Jeff wrote:just use a normal cfg file (without autoboot mode).telengard wrote:I'm having difficulty switching disks. The LCD buttons are just cycling between the disk in A (as chosen via autoboot) and autoboot.hxe. It's not allowing me to traverse the SD. Is the use of the autoboot.hxe mutually exclusive with use of the LCD/buttons?
When traversing w/ the buttons I would expect it to just walk the filesystem on the SD.
I'll do that though if that is the easiest method, thanks.