Never getting prompted for drive

General discussion forum - for all that doesn't fit in any other category.
Post Reply
Wizard1969
Posts: 9
Joined: Wed Sep 09, 2015 11:49 am

Never getting prompted for drive

Post by Wizard1969 »

I understand that when I first turn the HxC on it is supposed to prompt me for a drive. It never does. I have enabled Drive B from both the settings and the configuration menu to no avail. It seems to work fine otherwise, but I can not select an image for drive B!

gonk23
Posts: 38
Joined: Sat Jun 15, 2013 4:21 pm
Location: Melbourne, Australia

Re: Never getting prompted for drive

Post by gonk23 »

I assume you're talking about the "Select a drive" menu that's meant to appear when the SD card is inserted (as described in section 3.4 of the user manual). I don't get this menu either, even if I ensure the "Disable disk drive selector" is UNticked in the config file settings. Maybe this behaviour was removed with later firmware versions, and the user manual/etc hasn't been updated yet?

Anyway, you can change drives (so that images can be selected) at any time by holding the middle HxC button down for a few seconds until the "Function menu" appears. There is a "Change drive" option there.

Wizard1969
Posts: 9
Joined: Wed Sep 09, 2015 11:49 am

Re: Never getting prompted for drive

Post by Wizard1969 »

ok

Post Reply