New firmware version 1.8.2.30 fail to format
New firmware version 1.8.2.30 fail to format
I'm update to my EMU But cannot format or delete file from disk .
And when back restore ver 1.7.0.2 It's work fine.
Why ???
And when back restore ver 1.7.0.2 It's work fine.
Why ???
Re: New firmware version 1.8.2.30 fail to format
Rev C or B HxC Floppy Emulator ?
Re: New firmware version 1.8.2.30 fail to format
rev c
when I format It can processing then finish.
But when pull out sdcard from slot and push it again the old data was appear.
when I format It can processing then finish.
But when pull out sdcard from slot and push it again the old data was appear.
Re: New firmware version 1.8.2.30 fail to format
WHich SDCard are you using ? Can you send me the HFE file by email ?sixty_cel wrote:rev c
when I format It can processing then finish.
But when pull out sdcard from slot and push it again the old data was appear.
Re: New firmware version 1.8.2.30 fail to format
2GB SDCARD brand "ELITE PRO"
Re: New firmware version 1.8.2.30 fail to format
Can you try another brand ?sixty_cel wrote:2GB SDCARD brand "ELITE PRO"
Re: New firmware version 1.8.2.30 fail to format
I. think. Just. Not up to another brand I. try. Kingston. and same result because when I
Operate by old version It is working fine why up to brand. I'm sold to many customer and
when. I up new firmware mean change new brand of sdcard oh !! No good.
Sorry. For. My bad English But I sold to my customer about 12set .
Operate by old version It is working fine why up to brand. I'm sold to many customer and
when. I up new firmware mean change new brand of sdcard oh !! No good.
Sorry. For. My bad English But I sold to my customer about 12set .
Re: New firmware version 1.8.2.30 fail to format
I don't understand : is it working with the Kingston or not ?
Question : You said rev C, but where did you buyed the board ? This was Kit version ?
Did you see a "SRAM test failed" message at power up?
Question : You said rev C, but where did you buyed the board ? This was Kit version ?
Did you see a "SRAM test failed" message at power up?
Re: New firmware version 1.8.2.30 fail to format
No It's not work by Kingston brand.
I buy from lotharek Poland .
Yes after update firmware and reboot I see that message.
What does It mean?
I'm in Thailand and ever buy 5 set of plane kit last year and recently buy 5 set of plane kit
again 5 set and 2 set of slim board 2 set of slim with black case .
Next order 10 set of slim set because I like the size of it .
And like the cost too.
Sorry for my bad English again.
I buy from lotharek Poland .
Yes after update firmware and reboot I see that message.
What does It mean?
I'm in Thailand and ever buy 5 set of plane kit last year and recently buy 5 set of plane kit
again 5 set and 2 set of slim board 2 set of slim with black case .
Next order 10 set of slim set because I like the size of it .
And like the cost too.
Sorry for my bad English again.
Re: New firmware version 1.8.2.30 fail to format
So we have found cause the issue : The firmware 1.8.x.x and up need the external SRAM 23K256 for the write support.sixty_cel wrote: Yes after update firmware and reboot I see that message.
What does It mean?
I'm in Thailand and ever buy 5 set of plane kit last year and recently buy 5 set of plane kit
Lotharek mount them since 2010 with the Rev C.
If you don't have it mounted on your board, please consider them as Rev B boards.
So for the Rev B version (or Rev C without the 23K256 SRAM), you should use the firmware v1.7.2.0.13 August 2013: Firmware SD HxCFloppyEmulator v1.8.2.24
...
...
...
-------------------------------------------------------------------------------------------------------------------------
-- Important !! : This version is not compatible with the old Revision B boards (2010 version)
-- The add-on SRAM chip is now needed for all write support ! (for more details please see the release 22/08/2010 below)
-------------------------------------------------------------------------------------------------------------------------
Slim boards have this external SRAM since the beginning.
No problem, mine is far to be perfect toosixty_cel wrote: Sorry for my bad English again.
Re: New firmware version 1.8.2.30 fail to format
Oh yes I'm all understand . It's my mistake that is not read all of firmware note.
Hehehe thank you so much.
Hehehe thank you so much.