Problem with ./hfcfe commands - command line version

General discussion forum - for all that doesn't fit in any other category.
Post Reply
ldkraemer
Posts: 36
Joined: Thu Feb 28, 2013 3:47 am

Problem with ./hfcfe commands - command line version

Post by ldkraemer » Fri Jan 10, 2020 2:28 pm

Jeff,
I have *.SCP file(s)s named KP2-001.scp that was created by SAMDISK from my .IMD file. I copied the
KP2-001.scp to the HxC build directory, then ran ./hxcfe

Code: Select all

$ cd ~/Downloads/HxC/hxcfloppyemu-code-r1904/HxCFloppyEmulator/build

$ ./hxcfe -finput:KAYPRO1_IMD.scp -infos
HxC Floppy Emulator : Floppy image file converter v2.0.3.1
Copyright (C) 2006-2019 Jean-Francois DEL NERO
This program comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions;

libhxcfe version : 2.10.2.2

Input file : KAYPRO1_IMD.scp
---------------------------------------------------------------------------
-                        File informations                                -
---------------------------------------------------------------------------
File: KAYPRO1_IMD.scp
Checking KAYPRO1_IMD.scp
File loader found : SCP_FLUX_STREAM (SCP Stream Loader)
Loading KAYPRO1_IMD.scp
file loader found!
Can't open config.script !
Loading SCP file...
Version : 0x09
Disk Type : 0x14
Start track : 0
End track : 39
Number of revolution(s) : 3
Flags : 0x01
File Checksum : 0x325583B0
Bit Cell width : 0
Number of heads : 1
Resolution factor : 0
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
track file successfully loaded and encoded!

File type : SCP_FLUX_STREAM - SCP Stream Loader
Floppy interface mode : GENERIC_SHUGART_DD_FLOPPYMODE - Shugart Interface
Number of Track : 40
Number of Side : 1
Total Size : 204800 Bytes, Number of sectors : 400
Stopping HxCFloppyEmulator...
Then I tried this command:

Code: Select all

$./hxcfe -finput:KAYPRO1_IMD.scp -list

HxC Floppy Emulator : Floppy image file converter v2.0.3.1
Copyright (C) 2006-2019 Jean-Francois DEL NERO
This program comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions;

libhxcfe version : 2.10.2.2

Input file : KAYPRO1_IMD.scp
---------------------------------------------------------------------------
-                        File image browser                               -
---------------------------------------------------------------------------
File: KAYPRO1_IMD.scp
Checking KAYPRO1_IMD.scp
File loader found : SCP_FLUX_STREAM (SCP Stream Loader)
Loading KAYPRO1_IMD.scp
file loader found!
Can't open config.script !
Loading SCP file...
Version : 0x09
Disk Type : 0x14
Start track : 0
End track : 39
Number of revolution(s) : 3
Flags : 0x01
File Checksum : 0x325583B0
Bit Cell width : 0
Number of heads : 1
Resolution factor : 0
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
Invalid rpm or tracklen (15288 RPM, 749)...
track file successfully loaded and encoded!

File type : SCP_FLUX_STREAM - SCP Stream Loader
Floppy interface mode : GENERIC_SHUGART_DD_FLOPPYMODE - Shugart Interface
Number of Track : 40
Number of Side : 1
Total Size : 204800 Bytes, Number of sectors : 400

------- Disk Tree --------
hxcfe_readSectorData : ERROR -> Sector not found ! track 0, side 0, sector 10,Sector size:512,Type:0

--------------------------
Stopping HxCFloppyEmulator...
I'm wondering why I'm seeing these errors in the command line version?

Thanks.

Larry

Post Reply