Support for TRS-80 Model 4P

HxC Floppy emulator support for all others computers...
Post Reply
retrobecanes
Posts: 1
Joined: Sun Sep 24, 2017 8:45 pm

Support for TRS-80 Model 4P

Post by retrobecanes »

I have been using HxC on my Amiga 500 and wanted to use it on my newly acquired TRS-80 Model 4P as well.
A few questions:
- does the HxC get connected directly to the internal floppy connector?
- Is there an autoboot.hfe option as well for the TRS-80? Do commands need to be entered on the TRS-80 to enable that feature?
- Any other setup/configuration options I should be aware of when using HxC on the TRS-80?

Thanks!

/Retrobecanes

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Support for TRS-80 Model 4P

Post by Jeff »

> - does the HxC get connected directly to the internal floppy connector?

yes. maybe an edge adaptor is needed.

> - Is there an autoboot.hfe option as well for the TRS-80? Do commands need to be entered on the TRS-80 to enable that feature?

not yet. Use the normal mode.

> - Any other setup/configuration options I should be aware of when using HxC on the TRS-80?

nothing special.

Post Reply