I'm planning to hook up a second HxC/Gotek drive as 'drive 2' on my IMSAI 8080.
My quick question is, do I put the second drive on the drive cable after the twist (drive 1 is presently before the twist)? Or should I put the drive before the twist (like drive 1) and just change the drive select jumper from S0 to S1?
Thanks
Phil
twist or jumper
Re: twist or jumper
With the SD HxC just change the switches according to the manual.namachari wrote:I'm planning to hook up a second HxC/Gotek drive as 'drive 2' on my IMSAI 8080.
My quick question is, do I put the second drive on the drive cable after the twist (drive 1 is presently before the twist)? Or should I put the drive before the twist (like drive 1) and just change the drive select jumper from S0 to S1?
Thanks
Phil
For the gotek you can't connect it after a twist.
Re: twist or jumper
Thanks Jeff,
So does that mean that two Gotek drives can be placed before the twist, one set for S0 (Drive A, presently working), the other S1 (Drive B)?
Thanks
Phil
So does that mean that two Gotek drives can be placed before the twist, one set for S0 (Drive A, presently working), the other S1 (Drive B)?
Thanks
Phil
Re: twist or jumper
before the twist yes.namachari wrote:Thanks Jeff,
So does that mean that two Gotek drives can be placed before the twist, one set for S0 (Drive A, presently working), the other S1 (Drive B)?
Thanks
Phil