HxC Floppy Drive Emulator

HxC Floppy Drive Emulator general information and news
It is currently Wed Jun 19, 2013 4:00 am

Board index » Computers support » Miscellaneous computers supports

All times are UTC + 2 hours




Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 
  Previous topic | Next topic 
Author Message
DFL
 Post subject: D64 format
PostPosted: Tue Jun 16, 2009 11:28 pm 
Offline

Joined: Wed Mar 18, 2009 1:56 pm
Posts: 44
Since v1.2.0.11 the software supports D64 format.

So, can I replace the drive inside the 1541 unit by a stand alone emulator?

Is this working?
Top
 Profile  
 
Jeff
 Post subject: Re: D64 format
PostPosted: Wed Jun 17, 2009 9:39 pm 
Offline
Site Admin

Joined: Fri Oct 20, 2006 12:12 am
Posts: 2899
Location: Paris
DFL wrote:
Since v1.2.0.11 the software supports D64 format.

So, can I replace the drive inside the 1541 unit by a stand alone emulator?

Is this working?


the c64 need the variable bitrate support. so for now the usb floppy emulator is the only one which could in theory support the c64.
But since i have never tested the D64 support on a real 1541/C64, you can consider it as non working. (that's why it is in an experimental state).
Top
 Profile  
 
CrazyIcecap
 Post subject:
PostPosted: Thu Jun 18, 2009 4:35 am 
Offline

Joined: Wed Sep 24, 2008 2:38 pm
Posts: 42
It could only replace the 1581, because the 1541 is a totally different system.
Top
 Profile  
 
Jeff
 Post subject:
PostPosted: Thu Jun 18, 2009 9:19 pm 
Offline
Site Admin

Joined: Fri Oct 20, 2006 12:12 am
Posts: 2899
Location: Paris
CrazyIcecap wrote:
It could only replace the 1581, because the 1541 is a totally different system.


the 1541 should be "supported" too, if you solder some wires directly to its motherboard ;-)
Top
 Profile  
 
CrazyIcecap
 Post subject:
PostPosted: Fri Jun 19, 2009 8:35 pm 
Offline

Joined: Wed Sep 24, 2008 2:38 pm
Posts: 42
Tell me more....which wires do i have to solder to the 1541-board? Would be very interesting... :twisted:
Top
 Profile  
 
test29
 Post subject:
PostPosted: Tue Sep 29, 2009 9:08 am 
Offline

Joined: Tue Sep 29, 2009 9:00 am
Posts: 4
I am also interested in c64 and drives 1541 and 1581.

Does latest software for HxC usb version support d81 files for 1581.

Also does anybody knows how to connect 1541 to HxC, what wires do I need to solder and where?
Top
 Profile  
 
Jeff
 Post subject:
PostPosted: Tue Oct 06, 2009 7:14 am 
Offline
Site Admin

Joined: Fri Oct 20, 2006 12:12 am
Posts: 2899
Location: Paris
test29 wrote:
I am also interested in c64 and drives 1541 and 1581.

Does latest software for HxC usb version support d81 files for 1581.

Also does anybody knows how to connect 1541 to HxC, what wires do I need to solder and where?


not yet. i don't have 1541 and c64.
Top
 Profile  
 
CrazyIcecap
 Post subject:
PostPosted: Tue Oct 06, 2009 3:47 pm 
Offline

Joined: Wed Sep 24, 2008 2:38 pm
Posts: 42
need one? I have about 5 C64 and at least 3 1541-II...
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 

Board index » Computers support » Miscellaneous computers supports

All times are UTC + 2 hours


Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group