TRS-80 Model 1 and the HXC SD FW Floppy Drive Emulator

[Audronic]

Hi Jeff

"" In this case you have just to set the pin 34 to HIGH into the embedded HxC menu.""
The Ready signal is not used.

I have cut the Link between 32 and 34 (not Needed)

How do I get into the Embedded HxC Menu Please. Is there documentation i have missed.
or the Name of the documentation Please.

Thanks again

Yours Ray

[Jeff]

Hi Jeff

"" In this case you have just to set the pin 34 to HIGH into the embedded HxC menu.""
The Ready signal is not used.

I have cut the Link between 32 and 34 (not Needed)

How do I get into the Embedded HxC Menu Please. Is there documentation i have missed.
or the Name of the documentation Please.

Thanks again

Yours Ray

Just remove the SD and press select -> Interface cfg -> custom -> select the pin 02 & pin 34 behavior.

[Audronic]

Hi Jeff

Thanks for the Setup info, I will use it if i get stuck again.

Yours Ray