PEAVEY SP working perfectly with HxC

HxC Floppy emulator support for all others Keyboards/Samplers...
Post Reply
Ohmen52
Posts: 17
Joined: Fri Aug 05, 2011 10:25 pm

PEAVEY SP working perfectly with HxC

Post by Ohmen52 »

I just wanna confirm a PEAVEY SP Sampler working fine with HxC Floppy emulators with these settings:

PEAVEY SP (OS Vers. 1.1):
-------------------------
1. Plug in the 34-pole floppy connector 1:1 and the 5Volt connector only when using the SDCard Floppy Emulator.
2. Dump any PEAVEY SP floppy disk with HxC's Floppy disk dump or load a floppy image created with OmniFlop
(http://www.shlock.co.uk/Utils/OmniFlop/OmniFlop.htm) for instance!

SDCard HxC Floppy Emulator (1.6.11.16) settings:
------------------------------------------------
SD HxC Floppy Emulator settings:
default

HFE file interface mode:
Auto

Hardware Jumper settings:
Atari ST/Amiga/Shugart, Drive A, ID0


USB HxC Floppy Emulator (1.6.11.16) settings:
---------------------------------------------
Drive ID setting:
MOTEA

Mode:
Auto

Jeff
Site Admin
Posts: 8091
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: PEAVEY SP working perfectly with HxC

Post by Jeff »

Ohmen52 wrote:I just wanna confirm a PEAVEY SP Sampler working fine with HxC Floppy emulators with these settings:

PEAVEY SP (OS Vers. 1.1):
-------------------------
1. Plug in the 34-pole floppy connector 1:1 and the 5Volt connector only when using the SDCard Floppy Emulator.
2. Dump any PEAVEY SP floppy disk with HxC's Floppy disk dump or load a floppy image created with OmniFlop
(http://www.shlock.co.uk/Utils/OmniFlop/OmniFlop.htm) for instance!

SDCard HxC Floppy Emulator (1.6.11.16) settings:
------------------------------------------------
SD HxC Floppy Emulator settings:
default

HFE file interface mode:
Auto

Hardware Jumper settings:
Atari ST/Amiga/Shugart, Drive A, ID0


USB HxC Floppy Emulator (1.6.11.16) settings:
---------------------------------------------
Drive ID setting:
MOTEA

Mode:
Auto
Thanks ! Can you send me the HFE file image ?

Ohmen52
Posts: 17
Joined: Fri Aug 05, 2011 10:25 pm

Re: PEAVEY SP working perfectly with HxC

Post by Ohmen52 »

I just sent you some files

part12studios
Posts: 1
Joined: Tue Jun 12, 2018 3:01 pm

Re: PEAVEY SP working perfectly with HxC

Post by part12studios »

Hi there, I'm late to this posting, but still interested in seeing if this is still an option.

I have one of my SP samplers that has a bad drive and it got me wondering if the SP has an option for a floppy emulator. Clearly the answer is yes! :)

I am curious though about the formatting? I have limited experience with these emulators.. i also just ordered one for my Amiga 1200.



Thanks,
Caleb

Post Reply