I thought I would share my quick and easy successful install.
*Jumper Setting - ID1A
*HxC Config - Default (Optionally, I turned off 2 Drives Emulation and Disabled Drive Selector)
*Floppy IMG - SDHxCFE_PC_1.44MB
You can test the drive install using the RM1x Test Page.
*Power the RM1x on while simultaneously holding "Pattern", "Pattern Chain" and "Utility".
*Press/Select "[F2] : MANUAL"
*Press/Select "19 : FDD (WRITE/READ)"
Yamaha RM1x: Working Install
Yamaha RM1x: Working Install
- Attachments
-
- Capture.PNG (32.67 KiB) Viewed 4423 times
-
- DSC06175.jpg (122.82 KiB) Viewed 4423 times
Re: Yamaha RM1x: Working Install
RM1x Test Page.
- Attachments
-
- DSC06179.jpg (130.79 KiB) Viewed 4422 times
-
- DSC06181.jpg (118.84 KiB) Viewed 4422 times
-
- DSC06183.jpg (113.19 KiB) Viewed 4422 times