Yamaha RM1x: Working Install

HxC Floppy emulator support for all others Keyboards/Samplers...
Post Reply
kreeper_6
Posts: 4
Joined: Sat Feb 25, 2017 10:24 am

Yamaha RM1x: Working Install

Post by kreeper_6 » Sun Feb 26, 2017 8:52 pm

I thought I would share my quick and easy successful install.

*Jumper Setting - ID1A
*HxC Config - Default (Optionally, I turned off 2 Drives Emulation and Disabled Drive Selector)
*Floppy IMG - SDHxCFE_PC_1.44MB

You can test the drive install using the RM1x Test Page.

*Power the RM1x on while simultaneously holding "Pattern", "Pattern Chain" and "Utility".
*Press/Select "[F2] : MANUAL"
*Press/Select "19 : FDD (WRITE/READ)"
Attachments
Capture.PNG
Capture.PNG (32.67 KiB) Viewed 1077 times
DSC06175.jpg
DSC06175.jpg (122.82 KiB) Viewed 1077 times

kreeper_6
Posts: 4
Joined: Sat Feb 25, 2017 10:24 am

Re: Yamaha RM1x: Working Install

Post by kreeper_6 » Sun Feb 26, 2017 8:54 pm

RM1x Test Page.
Attachments
DSC06179.jpg
DSC06179.jpg (130.79 KiB) Viewed 1076 times
DSC06181.jpg
DSC06181.jpg (118.84 KiB) Viewed 1076 times
DSC06183.jpg
DSC06183.jpg (113.19 KiB) Viewed 1076 times

Post Reply