Switching out FZ-1 Floppy drive with PC drive for dummies

HxC Floppy emulator support for all others Keyboards/Samplers...
Post Reply
Nathan
Posts: 1
Joined: Mon Feb 15, 2016 3:12 am

Switching out FZ-1 Floppy drive with PC drive for dummies

Post by Nathan » Mon Feb 15, 2016 3:21 am

Help as I am the dummy. I have my FZ-1 apart and have replaced the display. Can anyone provide step by step instructions on replacing my original Matsushit drive with my PC Mitsumi D63119 drive? I need help beyond language like "switch WD61 with P12 and cross over the ribbon to port combobulator 127". Is there sites with pictures posted? Thanks

Kubi
Posts: 10
Joined: Sun Jan 17, 2016 11:07 pm

Re: Switching out FZ-1 Floppy drive with PC drive for dummie

Post by Kubi » Thu Mar 24, 2016 2:11 pm

Hi!

Here is a good place to ask for assistance: http://floppy.shugart.free.fr/page.php? ... /index.htm

I tried to modify several Floppy Drives but without success. An alternative solution could be Kryoflux in case that you have damaged disks.
It worked very fine for me. I have saved all my disks even if they had bad sectors.

Best Regards,
Kubi

Post Reply