Hello,
I would like to know if the emulator is compatible with Korg Trinity synthesizer and eventually know if it can both read and write on the SD emulator.
I've recently tested a Gotek floppy emulator and it works in some way except for upgrading the operating system.
Basically the procedure to load the O.S. is to press a combination of buttons on the Trinity and keep it pressed while powering on the keyboard and insert the floppy disk with the O.S. to be loaded, but unfortunately the Gotek emulator can't be recognized by the keyboard during this operation (so before the O.S. is loaded).
The original floppy installed into the Trinity is a Panasonic JU-257A726P.
If the HxC emulator if fully compatible I will get one immediately.
Thanks in advance for the help!
Compatibility with Korg Trinity
Re: Compatibility with Korg Trinity
A SD HxC mount the images a waaaay faster at power up than the Gotek having to deal with the whole USB stack.
So yes for sure the HxC will work
So yes for sure the HxC will work
Re: Compatibility with Korg Trinity
Hi Jeff,
I wrote you an email from the contact form of the HxC website, please let me know you you received it, thanks
I wrote you an email from the contact form of the HxC website, please let me know you you received it, thanks
Re: Compatibility with Korg Trinity
@mathausen,
Hello,
I've flashed my Gotek with HxC firmware and I can't load disks with the Trinity. I can see the files on the screen but each time I want to load one by touching the screen, the synth makes a disk refresh. Did you manage to make yours running ? Which configuration do you use ? Is DS1 jumper closed ? I personnaly use indexed mode. This works well. Which interface mode do you use, PC 1.44 HD, Shugart... ? Your help is welcome. Thanks
Hello,
I've flashed my Gotek with HxC firmware and I can't load disks with the Trinity. I can see the files on the screen but each time I want to load one by touching the screen, the synth makes a disk refresh. Did you manage to make yours running ? Which configuration do you use ? Is DS1 jumper closed ? I personnaly use indexed mode. This works well. Which interface mode do you use, PC 1.44 HD, Shugart... ? Your help is welcome. Thanks