Issues loading EII hxe files into Oberheim DPX

HxC Floppy emulator support for all others Keyboards/Samplers...
Post Reply
mikey_t
Posts: 4
Joined: Sun Sep 07, 2014 7:04 pm

Issues loading EII hxe files into Oberheim DPX

Post by mikey_t »

Hi there....maybe someone can help....I have been using the hxc on my oberheim dpx...and it works fine :D
A friend of mine gave me an Emulator II hxc image but my oberheim dpx cant load it....

Here is an example of a dpx file (Piano) which works fine with my hxc reader, and the emu eii file which doesn't....
http://we.tl/x7cRbAvTOA

do i need to do something to be able to load the emu eii file...when I import it using the hxc disk software, the software reads it and gives no errors...
when i try to load it using the hxc reader my DPX, the Oberhein says NF , not formatted

Thanks!

Mike

Jeff
Site Admin
Posts: 8091
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Issues loading EII hxe files into Oberheim DPX

Post by Jeff »

Is it something doable with true EMu floppies ?

mikey_t
Posts: 4
Joined: Sun Sep 07, 2014 7:04 pm

Re: Issues loading EII hxe files into Oberheim DPX

Post by mikey_t »

Hi Jeff

i believe the issue is as follows:

the dpx has two seperate floppies drivesm the 3 ince and 5 inch ones

http://3.bp.blogspot.com/_rScBRKlTdoE/T ... G_2725.jpg

the dpx can load akai s900 floppies, prophet2000 floppies and emu emulator ii disks
both the s900 and p2000 images work fine for me as they are from the 3 inch floppy drive
but the emu eii fuiles would be images of the 5,25" files i.e. the lower disk drive in the photo above

maybe i need to change the hxc config file when trying to load the emu ii ones?

i hope this makes sense....

Jeff
Site Admin
Posts: 8091
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Issues loading EII hxe files into Oberheim DPX

Post by Jeff »

Ok understand. Does both floppy disk drive connected on the same floppy ribbon ?

mikey_t
Posts: 4
Joined: Sun Sep 07, 2014 7:04 pm

Re: Issues loading EII hxe files into Oberheim DPX

Post by mikey_t »

Hi Jeff
i think they are seperate floppy ribbons
here are some photos which i hope may help
http://www.blue-jet.de/german/obdpx/obdpx_01.htm

Jeff
Site Admin
Posts: 8091
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Issues loading EII hxe files into Oberheim DPX

Post by Jeff »

mikey_t wrote:Hi Jeff
i think they are seperate floppy ribbons
here are some photos which i hope may help
http://www.blue-jet.de/german/obdpx/obdpx_01.htm
Try to set the ID1-A switch to ON.

mikey_t
Posts: 4
Joined: Sun Sep 07, 2014 7:04 pm

Re: Issues loading EII hxe files into Oberheim DPX

Post by mikey_t »

Hi Jeff

Thanks for your help!!

Switching to IDA-1 enables me to load the ermulator II images!
However now the Prophet 2000 and Oberheim DPX images wont load

i have tried all of the different switches on the back, but it doesnt seem to help

either I can load the 3.5 inch floppy bay images OR the 5.25 inch floppy images....but not both, without having to change the switch at the back, which then stops the other type from loading....

80sboy
Posts: 25
Joined: Sun May 29, 2011 10:40 am

Re: Issues loading EII hxe files into Oberheim DPX

Post by 80sboy »

Did you ever get this resolved?

Jeff
Site Admin
Posts: 8091
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Issues loading EII hxe files into Oberheim DPX

Post by Jeff »

80sboy wrote:Did you ever get this resolved?
There is nothing to resolve since the DPX seems to use a different FDC for each drive ID : One able to read the prophet and dpx disks and the other for the Emu disks.

Maybe that enabling both switches in the same time on the HxC (ID0-A + ID1-A) will allow you to load both image type... to be tested...

kreeper_6
Posts: 4
Joined: Sat Feb 25, 2017 10:24 am

Re: Issues loading EII hxe files into Oberheim DPX

Post by kreeper_6 »

I don't have hxc for my dpx yet but you have to convert the eii files into dpx 3.5" format with E2DPX in the DPXTOOLS suite...


http://users.skynet.be/emxp/DPX.htm


It is command line so an easy way to run the conversion is by making a BAT files, easy to do...


http://torlus.com/floppy/forum/viewtopi ... =18&t=1664

Post Reply