Technics KN 2000 / Disk Change

HxC Floppy emulator support for all others Keyboards/Samplers...
Jeff
Site Admin
Posts: 8091
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Technics KN 2000 / Disk Change

Post by Jeff »

Is there any relation/point with the HxC Floppy Emulator ?

rdoctor
Posts: 2
Joined: Sat Jan 23, 2016 6:06 pm

Re: Technics KN 2000 / Disk Change

Post by rdoctor »

sambell wrote:Hello, Roberto, I went through some of those problems and finally discovered there was a discrepancy on the wiring diagram. Pin 9 on the KN2000 should be connected to pin 32 of the emulator. When I made that connection, it worked perfectly. Please let me know how it works.
Sam
Hi sambell, as you can read, I have bought an adapter with a connection between pin 9 of the kn2000 and pin32 of the emulator. Now it doesn't work, but I can wire another external bridge. :shock:


Jeff wrote:Is there any relation/point with the HxC Floppy Emulator ?
Hi Jeff, I'm sorry. Perhaps my questions are not in the right forum, but this is the only forum about an installation of a floppy emulator in a keyboard Technics Kn2000. :(

Roccochiarelli
Posts: 5
Joined: Thu Oct 25, 2018 9:49 pm

Re: Technics KN 2000 emulator Gotek

Post by Roccochiarelli »

hi to all, I resurrected this tread after a long time, I also have a kn2000 and I bought, to modernize, the emulator of the Gotek SFRM72TU100K, with the jumper only on S1, and, the belt https://www.ebay.it /itm/Technics-KN-2000-KN2000-Floppy-Belt-Matsushita-EME-213KR-Emulator/302893458305?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649, I used the program to partition a 4 usb stick G, I inserted midi songs on two virtual disks but my kn2000 does not want to read them or open the disk. It gives me the same error that gives a rdoctor, can you help me? thank you

Jeff
Site Admin
Posts: 8091
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Technics KN 2000 emulator Gotek

Post by Jeff »

Roccochiarelli wrote:
Thu Oct 25, 2018 10:13 pm
hi to all, I resurrected this tread after a long time, I also have a kn2000 and I bought, to modernize, the emulator of the Gotek SFRM72TU100K, with the jumper only on S1, and, the belt https://www.ebay.it /itm/Technics-KN-2000-KN2000-Floppy-Belt-Matsushita-EME-213KR-Emulator/302893458305?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649, I used the program to partition a 4 usb stick G, I inserted midi songs on two virtual disks but my kn2000 does not want to read them or open the disk. It gives me the same error that gives a rdoctor, can you help me? thank you
Have you the HxC firmware ? :
https://hxc2001.com/store

Roccochiarelli
Posts: 5
Joined: Thu Oct 25, 2018 9:49 pm

Re: Technics KN 2000 / Disk Change

Post by Roccochiarelli »

No, I do not have the hxC firmware, the one I have is only the Gotek and the emulator and I do not even know how to use it, but if you explain it and this helps me to solve my problem I can ask where to buy it, thanks. What is the purpose of this firmware?

Jeff
Site Admin
Posts: 8091
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Technics KN 2000 / Disk Change

Post by Jeff »

Roccochiarelli wrote:
Thu Oct 25, 2018 11:18 pm
No, I do not have the hxC firmware, the one I have is only the Gotek and the emulator and I do not even know how to use it, but if you explain it and this helps me to solve my problem I can ask where to buy it, thanks. What is the purpose of this firmware?
The purpose is to replace the original firmware. the HxC firmware offer better compatibility.
We don't provide support if you don't have the HxC Firmware into the emulator.

Roccochiarelli
Posts: 5
Joined: Thu Oct 25, 2018 9:49 pm

Re: Technics KN 2000 / Disk Change

Post by Roccochiarelli »

Hi , with this firmware is secure for resolve my difficult?

Jeff
Site Admin
Posts: 8091
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Technics KN 2000 / Disk Change

Post by Jeff »

yes sure.

Roccochiarelli
Posts: 5
Joined: Thu Oct 25, 2018 9:49 pm

Re: Technics KN 2000 / Disk Change

Post by Roccochiarelli »

sorry but my emulator is sfr1m44, and not sfrm72

Jeff
Site Admin
Posts: 8091
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Technics KN 2000 / Disk Change

Post by Jeff »

Roccochiarelli wrote:
Tue Oct 30, 2018 8:22 pm
sorry but my emulator is sfr1m44, and not sfrm72
not a problem for the hxc firmware.

Roccochiarelli
Posts: 5
Joined: Thu Oct 25, 2018 9:49 pm

Re: Technics KN 2000 / Disk Change

Post by Roccochiarelli »

ok , where I can buy it? but I need instruction , help me please

Jeff
Site Admin
Posts: 8091
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Technics KN 2000 / Disk Change

Post by Jeff »

Roccochiarelli wrote:
Fri Nov 02, 2018 10:28 pm
ok , where I can buy it? but I need instruction , help me please
there : https://hxc2001.com/store

Post Reply