Dynacord Add-One & Add-Drive with HXC

HxC Floppy emulator support for all others Keyboards/Samplers...
Post Reply
KazRemark
Posts: 1
Joined: Thu Jan 28, 2016 6:15 am

Dynacord Add-One & Add-Drive with HXC

Post by KazRemark » Thu Jan 28, 2016 6:19 am

Just installed the Lotharek emulator in my Dynacord Add-Drive that goes with my Add-One. Seems to work, and is recognized but when I load .hfe images of Dynacord Add-One programs that I placed on the SD card and try and load them, I get a progress indicator followed by "Not Add-One format". Anybody have any tips for what I might be doing wrong?

Jeff
Site Admin
Posts: 5074
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Dynacord Add-One & Add-Drive with HXC

Post by Jeff » Tue Feb 09, 2016 9:30 am

Jumper setting, floppy ribbon connection, bad hfe file image, bad interface mode...
Hard to say without seeing what you have done.
Please at least post a picture of the hxc lcd.

tron
Posts: 2
Joined: Thu Apr 28, 2016 3:35 pm

Re: Dynacord Add-One & Add-Drive with HXC

Post by tron » Fri Apr 29, 2016 5:21 pm

KazRemark wrote:Just installed the Lotharek emulator in my Dynacord Add-Drive that goes with my Add-One. Seems to work, and is recognized but when I load .hfe images of Dynacord Add-One programs that I placed on the SD card and try and load them, I get a progress indicator followed by "Not Add-One format". Anybody have any tips for what I might be doing wrong?

Did you search on the drive name and number? Here is all data needed to get it working in the right hands:
(I think the add-drive formats to 820 kb. The drives name is Panasonic Ju-363)

Many have been asking for HXC for Dynacord Add-Drive.

Here http://floppy.shugart.free.fr/docs/pana ... ju-363.pdf
and even better http://www.ti99.com/exelvision/website/ ... 23-363.pdf

Let me know if you have progress as im about to do the same,

or any help from the moderator?

as I'm not into this type of stuff at all.

Two .img Addrive floppy images here: https://www.dropbox.com/s/g48zi3c3h1lej ... s.zip?dl=0 (i did not make them, my pc's floppy drive seems not to have the right alignment to read them, but apparently people use them).

I hope this is whats needed to make a driver file for the HxC. I have one and would like to get it woring in the Dynacord Add-drive like many others it seems.

Just for the record: I tried with these drives in the adddrive: Emu, PC ibm, Datadisk alesis and Atari st. The Addone said 'no disk in drive'.

Tron
Attachments
6.JPG
6.JPG (48.97 KiB) Viewed 1590 times

Jeff
Site Admin
Posts: 5074
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Dynacord Add-One & Add-Drive with HXC

Post by Jeff » Fri Apr 29, 2016 9:42 pm

Please post of picture of the HxC lcd with an file image selected...

tron
Posts: 2
Joined: Thu Apr 28, 2016 3:35 pm

Re: Dynacord Add-One & Add-Drive with HXC

Post by tron » Tue May 03, 2016 12:13 am

I'm not really as far as the guy who started the tread so it would be better if he answered.

But so far I get 'no disk in drive' in the add-one window when trying to format (same result with as with the floppy drive types i have tried with earlier (emu and pc) in the Add-Drive.

The HxC makes a row of blocks in line one, and nothing else, but I'm not the right guy to answer this question since I barely just have gotten the HXC and have not read anything about it yet and not done any sttings or anything yet. I'm sure i'm not doing things right regarding the HXC.



KazRemark can you please give the info needed?

roginator
Posts: 2
Joined: Fri Jan 05, 2018 12:04 pm

Re: Dynacord Add-One & Add-Drive with HXC

Post by roginator » Fri Jan 05, 2018 12:55 pm

need some ADD one images for HXC and way how to connect it !

i have open machine and want to add HXC drive but info on this is not here !

Damir

Jeff
Site Admin
Posts: 5074
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Dynacord Add-One & Add-Drive with HXC

Post by Jeff » Fri Jan 05, 2018 3:02 pm

roginator wrote:
Fri Jan 05, 2018 12:55 pm
need some ADD one images for HXC and way how to connect it !

i have open machine and want to add HXC drive but info on this is not here !

Damir
Connect it like the floppy drive, with the switch ID0-A (1) to ON.

Take some EPS ensoniq images + the cfg file from this zip:
http://hxc2001.com/download/floppy_driv ... Images.zip
copy them to one sdcard.
Insert it into the emulator. Try to format one EPS image with the Dynacord : check that it try to access the drive.
If yes and if the format is successful you have a working Dynacord image.

Post Reply