Ensoniq EPS

HxC Floppy Emulator Ensoniq Keyboards/Samplers support
Post Reply
soundsandsons
Posts: 3
Joined: Wed Jun 24, 2015 6:42 pm
Location: London, UK

Ensoniq EPS

Post by soundsandsons »

Hello
We're new to the forum. 100% Newbies. We have an Ensoniq EPS and have installed HXC2001 Disc Emulator. We have used it a little, with four banks but have had issues with capacity. Today when we started, the HXC2001 did not recognise the SD card. Nothing we do seems to rectify our problem. Is there something obvious we're missing. Any wise word appreciated. Thanks in advance.

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Ensoniq EPS

Post by Jeff »

what "say" the emulator ?

soundsandsons
Posts: 3
Joined: Wed Jun 24, 2015 6:42 pm
Location: London, UK

Re: Ensoniq EPS

Post by soundsandsons »

Hello. I'm away from studio at the moment but will look as soon as I return. Thanks for your reply.

jean
Posts: 3
Joined: Sun Jun 28, 2015 10:03 pm

Re: Ensoniq EPS

Post by jean »

Salut Jeff

j'ai installé le hxc2001 sur mon sampler eps ensoniq. tout fonctionne à merveille mais : je ne comprends pas comment créer d'autres images disk que celle déjà présentes sous le nom
DSKA0000 / DSKA0001 / DSKA0002 / DSKA0003.

Sur une carte SD de 2 giga je me retrouve avec 4 x 2méga.

J'ai essayé à partir du software de créer un disque en suivant le protocole suivant :

sd hxcfloppy emulator setting > désactiver auto > generic shugart > ok
disk brwoser > file system type > 3"5 720kb dsdd FAT 12 > create disk >save export sur ma carte sd.

le fichier créé apparait comme suit : Disk_Image.hfe

j'ai un fichier de 1,961 Mo mais lorsque je veux y accéder depuis l'eps, il m'indique "bad device Id".

J'ai sans doute raté un truc dans le process, qu'en pensez-vous ?

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Ensoniq EPS

Post by Jeff »

Pour faire simple on va commencer par tester des images déjà disponibles :

https://hxc2001.com/download/floppy_driv ... Images.zip

jean
Posts: 3
Joined: Sun Jun 28, 2015 10:03 pm

Re: Ensoniq EPS

Post by jean »

Hello Jeff,

je crois comprendre un peu mieux : les fichier DSKA0000.hfe contiennent les banques de son originales de L'EPS. Les EPSBLANK sont celles qui permettent de sauvegarder mais samples. Ok.
Mais quelle est la procédure à suivre pour les installer sur la carte SD et pouvoir les faire reconnaitre par l'EPS ?
Je n'y suis pas arrivé.

Merci

soundsandsons
Posts: 3
Joined: Wed Jun 24, 2015 6:42 pm
Location: London, UK

Re: Ensoniq EPS

Post by soundsandsons »

Jeff wrote:what "say" the emulator ?
Hi Jeff, excuse the delay in my reply. At first the HXC Floppy Emulator said it did not recognize the SD card. Now, after checking the contents in on another reader, HXC does see the SD card and contents.

But now the EPS tells me the disk is not formatted.

We have had the HXC running with the EPS for six or more months so this is a new issue.

Looking forward to your reply.

Many thanks

jean
Posts: 3
Joined: Sun Jun 28, 2015 10:03 pm

Re: Ensoniq EPS

Post by jean »

Bonjour Jeff,

toujours bloqué sur cette histoire d'allocation de mémoire sur la carte SD... :-(
comment faire ?

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Ensoniq EPS

Post by Jeff »

jean wrote:Bonjour Jeff,

toujours bloqué sur cette histoire d'allocation de mémoire sur la carte SD... :-(
comment faire ?
Il faut juste deziper l'archive ensoniq (SDHxCFE_Ensoniq_EPS.zip) a la racine de la carte SD :
https://hxc2001.com/download/floppy_driv ... Images.zip

Post Reply