ASR 10 wont boot

HxC Floppy Emulator Ensoniq Keyboards/Samplers support
Post Reply
Crocket
Posts: 2
Joined: Thu Jul 18, 2013 10:02 pm

ASR 10 wont boot

Post by Crocket »

Hi.

New to this helpfull forum.

ASR 10 with SD Floppy Emulator rev. F bought 1 month ago.
I formatted a 4Gb. Class6 card with FAT 32
Put on the quick Floppy/ Ensoniq files. just copied from laptop to SD card.
When trying to boot the ASR 10, it says loading but stops with the famous error 040.

Drive ID is 1

It should all be very simple but what could I be doing wrong ?

For all help
Thanx

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: ASR 10 wont boot

Post by Jeff »

Try to reconnect the floppy cable to the other way (colored wire to the other side).

Crocket
Posts: 2
Joined: Thu Jul 18, 2013 10:02 pm

Re: ASR 10 wont boot

Post by Crocket »

Hi Jeff

100 % sure that flatcable orientation is correct, tried reversing anyway, :D

Please look at video file of emulator display when trying to load ASR 10 OS.

thanx
Attachments
IMG_0999 (2).zip
(236.22 KiB) Downloaded 446 times

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: ASR 10 wont boot

Post by Jeff »

mhh very strange. Are you sure that the flat cable is not damaged ? Maybe you should try another one.
Anyway i send to you a new firmware to try.

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: ASR 10 wont boot

Post by Jeff »

By email :
Crocket wrote: Yes, 2 hours ago I downloaded latest firmware and now my ASR 10 works.

[...]

Thanx so much

Post Reply