Instructions for SD Floppy Emulator‏ - ASR10 RACK

[CharlyFlopEnsoniq]

Hello, I received the SD Floppy Emulator REV F and need step by step instructions on the following topics:
1) Configuration ID SD Floppy Emulator. For you to guide me, send photos of floppy disk Ensoniq ASR 10 Rack.
2) After formatted in FAT 32 SD memory.
How to install operating system Ensoniq ASR 10 SD memory?
Thanks and regards.

[Jeff]

Hello, I received the SD Floppy Emulator REV F and need step by step instructions on the following topics:
1) Configuration ID SD Floppy Emulator. For you to guide me, send photos of floppy disk Ensoniq ASR 10 Rack.
2) After formatted in FAT 32 SD memory.
How to install operating system Ensoniq ASR 10 SD memory?
Thanks and regards.

All is there :

https://hxc2001.com/download/floppy_driv ... Images.zip
Unzip SDHxCFE_Ensoniq_ASR10.zip on a SDCard (formatted in FAT32)
After this the sd is ready to be used with the HxC.

[CharlyFlopEnsoniq]

Thanks for your reply, I Unzip SDHxCFE_Ensoniq_ASR10.zip on a SDCard (formatted in FAT32) this step is ready.
Now I need to tell me about "JUMPER SETTING" for SD Floppy Emulator
Thank you for your help.
Greetings!

[Jeff]

Let's try the default setting !