Edge Card to 34 Pin Connector for HxC?

HxC Floppy Emulator E-mu Emulator I & II support
Post Reply
dykesh
Posts: 8
Joined: Thu Jul 12, 2012 3:28 pm

Edge Card to 34 Pin Connector for HxC?

Post by dykesh » Thu Jul 12, 2012 11:15 pm

I have an early Emulator II with one 5.25 Floppy Drive. Inside there are additional connectors for a second drive with one 4 pin molex for power and a edge card connector for another floppy drive. I've got a 4 pin molex adapter for the HxC but I cannot find anything on the internet to adapt the edge card to a 34 pin header? I think I could manually change out the edge card with a 34 pin header but I would rather find an adapter or some other option. Could anyone tell me what your doing with this? thanks

Jeff
Site Admin
Posts: 5741
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Edge Card to 34 Pin Connector for HxC?

Post by Jeff » Fri Jul 13, 2012 7:46 am

dykesh wrote:I have an early Emulator II with one 5.25 Floppy Drive. Inside there are additional connectors for a second drive with one 4 pin molex for power and a edge card connector for another floppy drive. I've got a 4 pin molex adapter for the HxC but I cannot find anything on the internet to adapt the edge card to a 34 pin header? I think I could manually change out the edge card with a 34 pin header but I would rather find an adapter or some other option. Could anyone tell me what your doing with this? thanks
Try to find old PC floppy cable with the edge connector.

other solution : try get an edge connector in your local electronic store and add it to an normal floppy cable.
Example :
http://fr.farnell.com/avx-interconnect/ ... /dp/635807

dykesh
Posts: 8
Joined: Thu Jul 12, 2012 3:28 pm

Re: Edge Card to 34 Pin Connector for HxC?

Post by dykesh » Fri Jul 13, 2012 4:55 pm

I found this to buy and try if it helps anyone else. I think it will replace the cable that's in there.

http://www.startech.com/Cables/Drive/ID ... Cable~FDAT

Thanks for the help.

Post Reply