Emulator I and II compatibility

HxC Floppy Emulator E-mu Emulator I & II support
Post Reply
Nightshop
Posts: 5
Joined: Wed Dec 08, 2010 6:52 pm

Emulator I and II compatibility

Post by Nightshop »

Hello ! i have received the sd card HXC from polland. It is a very good job. Thank to all HXC group and people who create and support this project

So,

I have an emulator II and according a good guy esynthesis , for the moment it is not possible to write data on the SDhxc from the emulator II.
Are you working on the project? thank you. Maybe the next firmware?



I come from the amiga 500 generation...

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Emulator I and II compatibility

Post by Jeff »

Nightshop wrote:Hello ! i have received the sd card HXC from polland. It is a very good job. Thank to all HXC group and people who create and support this project

So,

I have an emulator II and according a good guy esynthesis , for the moment it is not possible to write data on the SDhxc from the emulator II.
Are you working on the project? thank you. Maybe the next firmware?



I come from the amiga 500 generation...
Yes i am working on this with esynthesis.

Nightshop
Posts: 5
Joined: Wed Dec 08, 2010 6:52 pm

Post by Nightshop »

Merry X-Mas !

HY, does the new firmware supports read and write format for the EII? thanks you

Nightshop
Posts: 5
Joined: Wed Dec 08, 2010 6:52 pm

Re: Emulator I and II compatibility

Post by Nightshop »

Hy thank you so much for the new firmware . Today I've found a 34 pin twisted cable ( 60cm it is short ) in my favorite shop. I have to test after reading the pdf notice!

My synth is a killer hit , thanks !

Post Reply