HxC Floppy Drive Emulator

I have an early Emulator II with one 5.25 Floppy Drive. Inside there are additional connectors for a second drive with one 4 pin molex for power and a edge card connector for another floppy drive. I've got a 4 pin molex adapter for the HxC but I cannot find anything on the internet to adapt the edge card to a 34 pin header? I think I could manually change out the edge card with a 34 pin header but I would rather find an adapter or some other option. Could anyone tell me what your doing with this? thanks

Try to find old PC floppy cable with the edge connector.

other solution : try get an edge connector in your local electronic store and add it to an normal floppy cable.
Example :
http://fr.farnell.com/avx-interconnect/ ... /dp/635807

I found this to buy and try if it helps anyone else. I think it will replace the cable that's in there.

http://www.startech.com/Cables/Drive/ID ... Cable~FDAT

Thanks for the help.