How to get voice from another bank ? HxC

HxC Floppy Emulator E-mu Emulator I & II support
Post Reply
EIIAttack
Posts: 4
Joined: Tue May 28, 2019 11:18 am

How to get voice from another bank ? HxC

Post by EIIAttack » Tue May 28, 2019 12:03 pm

Hello

I have a HxC SD emulator installed on bay 1 of my Emulator 2
and second bay is a 5" drive.

What I couldn't figure out is that , how to get a voice from another bank on a SD while you are in another bank ?
When I do that, EII trying to get it from drive B .

How to setup the HxC to act as second drive , and get a voice from a selected bank ?

That would be super helpful !

Jeff
Site Admin
Posts: 6288
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: How to get voice from another bank ? HxC

Post by Jeff » Thu May 30, 2019 11:14 am

If you want to set the hxc drive to B, you need to change the HxC switches setting (ID1-A) and also change the second drive jumper settings to change it to drive A.

EIIAttack
Posts: 4
Joined: Tue May 28, 2019 11:18 am

Re: How to get voice from another bank ? HxC

Post by EIIAttack » Thu May 30, 2019 11:37 pm

Jeff wrote:
Thu May 30, 2019 11:14 am
If you want to set the hxc drive to B, you need to change the HxC switches setting (ID1-A) and also change the second drive jumper settings to change it to drive A.
Hello Jeff thanks for the reply

So , does it mean you can get another voice from another bank requires that the bank you are looking at has to be at drive B ?
I really dont get it clearly .
Lets say I set the HxC to drive B , and machine should boot from there . And when I call for a voice , will it take it from B again .
I have a feeling this time it will search at A .

well , I am a bit confused about this .
Couldn't figure out how to get voice from SD card , while you are on another voice on same SD card

Jeff
Site Admin
Posts: 6288
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: How to get voice from another bank ? HxC

Post by Jeff » Thu May 30, 2019 11:47 pm

EIIAttack wrote:
Thu May 30, 2019 11:37 pm
Jeff wrote:
Thu May 30, 2019 11:14 am
If you want to set the hxc drive to B, you need to change the HxC switches setting (ID1-A) and also change the second drive jumper settings to change it to drive A.
Hello Jeff thanks for the reply

So , does it mean you can get another voice from another bank requires that the bank you are looking at has to be at drive B ?
i don't know. This is a E-mu Emulator specific question, not directly related to the floppy emulator.
I just answered to this :
EIIAttack wrote:
Tue May 28, 2019 12:03 pm
How to setup the HxC to act as second drive ,...

EIIAttack
Posts: 4
Joined: Tue May 28, 2019 11:18 am

Re: How to get voice from another bank ? HxC

Post by EIIAttack » Thu May 30, 2019 11:55 pm

Jeff wrote:
Thu May 30, 2019 11:47 pm
EIIAttack wrote:
Thu May 30, 2019 11:37 pm
Jeff wrote:
Thu May 30, 2019 11:14 am
If you want to set the hxc drive to B, you need to change the HxC switches setting (ID1-A) and also change the second drive jumper settings to change it to drive A.
Hello Jeff thanks for the reply

So , does it mean you can get another voice from another bank requires that the bank you are looking at has to be at drive B ?
i don't know. This is a E-mu Emulator specific question, not directly related to the floppy emulator.
I just answered to this :
EIIAttack wrote:
Tue May 28, 2019 12:03 pm
How to setup the HxC to act as second drive ,...
thanks , fair enough .

EIIAttack
Posts: 4
Joined: Tue May 28, 2019 11:18 am

Re: How to get voice from another bank ? HxC

Post by EIIAttack » Fri May 31, 2019 12:18 am

I just saw the section of the forum as EII , so I was expecting some guidance
maybe someone else can jump in to conversation .
thanks anyway

Post Reply