JYL wrote:...nothing shows in the display...
Really ? Nothing ? In this case send back the device to Lotharek...
If nothing is displayed on the lcd, the emulator is probably dead...
JYL wrote:...nothing shows in the display...
Did You try to upload firmware ?
tried that, and i see squares only. please check the video that will be sent.- do you see anything on lcd display ? please rotate with potentiometer to righ to see letters / squares ?
pulled it out and reinserted again, tried and still not working.- is lcd properly inserted ?
will send you videos shortly.please, send some picture to lotharek@lotharek.pl
Not risky if done correctlyJYL wrote:Did You try to upload firmware ?
yes i did.
is it something a user should not try?
the firmware update file was available, and also checked the notes in the file, but did not find any warning or anything like that.
as far as i know, updating firmware, os, apps, etc... is the most basic and essential procedure in trouble shooting modern day electronic equipments...
let people know if it is risky?
Retry the update process again. Let it finish and restart automatically.JYL wrote:
Is there anything else i can try here?
Sorry but i don't understand. a Led is blinking ?JYL wrote:...3 unblinking eye-blindingly-bright led lights. dasd,amslhjkads!!
Even if you press the left & right push button before and after the power up?JYL wrote:no blinking, whatsoever...
i think this is the exact problem i have and i have a RevC!Jeff wrote:This is the right software for your emax (RevC) coming from another HxC user80sboy wrote:Surprise that works!
Thanks so much! Not sure what the difference was, but it works now!
best,
tom!
No, your problem is that you an Emax 1000, without the right OS disk.starfield wrote:i think this is the exact problem i have and i have a RevC!Jeff wrote:This is the right software for your emax (RevC) coming from another HxC user80sboy wrote:Surprise that works!
Thanks so much! Not sure what the difference was, but it works now!
best,
tom!