Which files have you on the usb stick ?
Gotek and Emax 1 will show screen "Loading Software.." but..
Re: Gotek and Emax 1 will show screen "Loading Software.." but..
Re: Gotek and Emax 1 will show screen "Loading Software.." but..
new at this...
what files do I need , to load OS and a few sounds?
Emax 1 no SE installed
what files do I need , to load OS and a few sounds?
Emax 1 no SE installed
Re: Gotek and Emax 1 will show screen "Loading Software.." but..
Then try the quick install zip :
There are files for emax :
https://hxc2001.com/download/floppy_dri ... Images.zip
Re: Gotek and Emax 1 will show screen "Loading Software.." but..
I tried these files.
the drive says "Nor" after inserting usb stick.
red light on usb stick flashes,..... Display still reads insert disc.
the drive says "Nor" after inserting usb stick.
red light on usb stick flashes,..... Display still reads insert disc.
Re: Gotek and Emax 1 will show screen "Loading Software.." but..
see : viewtopic.php?f=33&t=1683#p18293
This doesn't work : I see "Nor" on the display when inserting the USB stick
The emulator is in "NORmal mode".
Since you don't have any OLED or LCD screen, you need to use the indexed mode or the "autoboot"/file selector mode if you have an Amiga/Atari ST/CPC.
- In indexed mode you must use the indexed config file and name the files images DSKA0000.XXX, DSKA0001.XXX, DSKA0002.XXX (replace XXX by the original file extension.)
See the usage page for more details.
The HXCSDFE.CFG indexed config files is in the firmware archive :
https://hxc2001.com/download/floppy_dri ... rmware.zip
Re: Gotek and Emax 1 will show screen "Loading Software.." but..
so close...
The Emax loaded a bank, Screen flashed " Female Choir" and then said "Wrong Software"
Here's what i have on the USB Stick, first attempt.
DSKA0000.hfe
DSKA0001.hfe
DSKA0002.hfe
HXCDFE.CFG
the second time,I tried theses files
DSKA0000.hfe
DSKA0001.hfe
DSKA0002.hfe
Emax_Bois_Disc.hfe
Emax_SE_Bios_Disc.hfe
emaxos.emx
HXCDFE.CFG
STANDARD Rev.3.2.HFE
both times screen read "Wrong Software"
The Emax loaded a bank, Screen flashed " Female Choir" and then said "Wrong Software"
Here's what i have on the USB Stick, first attempt.
DSKA0000.hfe
DSKA0001.hfe
DSKA0002.hfe
HXCDFE.CFG
the second time,I tried theses files
DSKA0000.hfe
DSKA0001.hfe
DSKA0002.hfe
Emax_Bois_Disc.hfe
Emax_SE_Bios_Disc.hfe
emaxos.emx
HXCDFE.CFG
STANDARD Rev.3.2.HFE
both times screen read "Wrong Software"
Re: Gotek and Emax 1 will show screen "Loading Software.." but..
Welcome to the Emax nightmare

The issue is that the OS version present on the sound disk doesn't match with the one loaded into memory.
Try to boot from the sound disk.
Re: Gotek and Emax 1 will show screen "Loading Software.." but..
I do not have any emax disc.
Is there an image of a "universal" OS disc, that might boot the Emax?
Is there an image of a "universal" OS disc, that might boot the Emax?
Re: Gotek and Emax 1 will show screen "Loading Software.." but..
Try to just select the sound disk and restart the emax with this disk.
Re: Gotek and Emax 1 will show screen "Loading Software.." but..
this is all new to me, Always wanted an Emax. Now I have 2 that don't work. 
sound disc?
I have almost all OS versions and Disc imagies for the Emax.
no floppies
I dont know the OS version of the Emax.
What files should be on a disc?

sound disc?
I have almost all OS versions and Disc imagies for the Emax.
no floppies
I dont know the OS version of the Emax.
What files should be on a disc?
Re: Gotek and Emax 1 will show screen "Loading Software.." but..
The "Female Choir" HFE.