My problem is with USB Gotek HxC reader.
I have connected it and copied hxc configuration file (standard)
From files with quick install disk images from hxc download tab (https://hxc2001.com/download/floppy_driv ... Images.zip)
I have copied operating system 1.2 and named it dska0001.
I have named blank images dska0002, dska0003 etc
SP1200 loads up (hxc 001 image), play sounds, everything fine except the fact it won’t save.
I do change in reader to position 003, 004 etc and then press DISK on SP and command 9 to save.
It ask:
format disk - pressed yes
then
another one - pressed no
then it shows:
„Try again? y/n
Read/VeryfyError”
My jumper is MO position but also tried with moving it on S1.
I have tried to save on same image that loading up the system with samples as I thought these blank images are incorrect but with no luck
![Sad :(](./images/smilies/icon_sad.gif)
Thank you in advance!