New 3"1/2 cased version !

Jeff · **Posted:** Wed Feb 22, 2012 10:39 pm

Some of you already know that we are working on an cased 3"1/2 version of the SD HxC Floppy Emulator since some months.
Here the first result :

This new board is based on the Rev C board.
For the moment all tests are ok.

Hopefully the case will be available in some days.

Stay tuned !

Note : Preorder open on the Lotharek webstore ! : http://www.lotharek.pl/product.php?pid=42

freaktmp · **Posted:** Thu Feb 23, 2012 6:27 pm

It looks great!!!

I wonder if it will fit inside an Amstrad CPC 6128...

5c4r7 · **Joined:** Fri Feb 25, 2011 7:07 am **Posts:** 52

I am excited to see a finished unit! I'm staying tuned for updated pics.

Great work!

5c4r7 · **Joined:** Fri Feb 25, 2011 7:07 am **Posts:** 52

Any photo updates of a finished unit gentlemen?

lotharek · **Posted:** Tue Mar 13, 2012 5:27 pm

I`m very happy i live in Poland, but there is small problem with All of US :-)

we always have time ;-)

that was joke.

honestly, waiting for final measurements at metal case producer and tact switches angled smd with actuator longer than 4,5mm

nutjob · **Joined:** Wed Mar 14, 2012 10:59 am **Posts:** 11

lotharek wrote:

waiting for final measurements at metal case producer and tact switches angled smd with actuator longer than 4,5mm

Very excited!

5c4r7 · **Joined:** Fri Feb 25, 2011 7:07 am **Posts:** 52

Haha, No problem Lotharek! I totally understand. Here in Canada I have a full time job as a broadcast engineer and run a music label, I am a musician myself, I operate my own multimedia/support business, I am a husband and father, etc... There is never enough time! When they are ready, they'll be ready so, no pressure intended. I am just excited! I really like the HXC and being able to mount them into my samplers standard floppy bays will be amazing! Keep up the great work!

mau_rizio · **Joined:** Tue May 05, 2009 5:08 pm **Posts:** 69

I've seen just now... that's just wonderfull

Good work Jeff & lotharek

lotharek · **Posted:** Thu Mar 22, 2012 5:25 pm

lotharek · **Posted:** Thu Mar 22, 2012 5:26 pm

Above are still last week prototypes to see proper fittings. final will be next but during prudction, which is about to RUN !!!!! after small correction of pcb (i need to move tact switched 1mm forward, also sd card slot and dipslay 1,5mm left...

Final CASE will be painted and will be black...

or...

will not be painted but with some designed for EMUL sticker - professional sticker not like those in chips ;-)