PREORDERING OF REV C
PREORDERING OF REV C
Hello Everyone,
just to inform You :
PREORDERING OF REV C (with amiga writes supoort) starts TODAY !!!
www.lotharek.pl
regards, lotharek
just to inform You :
PREORDERING OF REV C (with amiga writes supoort) starts TODAY !!!
www.lotharek.pl
regards, lotharek
..... Atari Roxxx !!!
Re: PREORDERING OF REV C
I really need change in my life sth....what a mess...
![Image](http://www.mmj.pl/~lotharek/stuff/zdj%EAcie0144.jpg)
![Image](http://www.mmj.pl/~lotharek/stuff/zdj%EAcie0144.jpg)
..... Atari Roxxx !!!
-
- Posts: 11
- Joined: Mon Oct 04, 2010 11:21 pm
Nice !
Can I ask a question though: what kind of 34-pin connector are you using on this REV C board: one with pins facing the top of the board, or one with pins facing the back of the board (like most floppy drives, in an angle of 90 degrees with the PCB) ?
I think the "mechanical" compatibility as a replacement unit for a floppy drive would be best if the 90 degree angle would be used...
Or do customers have a choice
?
Can I ask a question though: what kind of 34-pin connector are you using on this REV C board: one with pins facing the top of the board, or one with pins facing the back of the board (like most floppy drives, in an angle of 90 degrees with the PCB) ?
I think the "mechanical" compatibility as a replacement unit for a floppy drive would be best if the 90 degree angle would be used...
Or do customers have a choice
![Smile :)](./images/smilies/icon_smile.gif)
As a heads-up... I went to the Lotharek webstore and placed one SD Emulator in my basket. When I changed the currency conversion from Euro, which was 75 Euro, to USD (US Dollar?), the amount changed to 37 USD instead of about 105 USD, which I thought was a bit odd... You may want to check if this is alright.
The country could not be selected, so no harm done (yet) I suppose.
The country could not be selected, so no harm done (yet) I suppose.
-
- Posts: 11
- Joined: Mon Oct 04, 2010 11:21 pm